Motorola MC3090G Integration Guide - Page 121

Application Deployment for Mobile 6.1 5 - 11 Parameter State Indicators The first column of the data table displays parameter state indicators. The state indicators display one of the states in Table 5-2 for a particular parameter: Table 5-2 Parameter Status Indicators Icon Indicator Description Modified This parameter was changed from its initial factory setting. Invalid This parameter is not valid for the selected device type. This can occur when a configuration file for one type of device is loaded and the device type is changed using the Device menu. Values marked "invalid" are not included in an exported. Window Status Bar The SCM status bar found on the bottom right corner of the window contains the items in Table 5-3 from left to right: Table 5-3 Window Status Bar Items Status Bar Item Description Invalid Count Number of parameters not valid for the selected device. Modified Count Number of parameters modified from the factory defaults. Device Type Device type - version. Figure 5-2 Sample Status Bar The sample status bar in Figure 5-2 shows that the current configuration file contains 1 Invalid Parameter and 2 Modified Parameters. File Deployment The CPF file created by the SCM export function must be deployed to the MC3000. 1. Optionally, use the Authenticode tools to sign the .cpf file. 2. Make the .cpf file read-only, then copy it to the MC3000. 3. Tap the filename to install. 4. Certain applications and settings require a cold boot to take affect. In these cases, cold boot the MC3000. Refer to the Windows Mobile Version 6 Help file for more information.