Motorola MC3090G Integration Guide - Page 46
Four Slot Ethernet Cradle, Setup, Ethernet Cradle Drivers (Windows CE 5.0)
View all Motorola MC3090G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2 - 8 MC3000 Integrator Guide Four Slot Ethernet Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 8-1. This section describes how to set up and use a Four Slot Ethernet cradle with the mobile computer. The Four Slot Ethernet cradle: • Provides 5.4 VDC power for operating the mobile computer. • Connects the mobile computer (up to four) to an Ethernet network. You cannot ActiveSync using the Four Slot Ethernet cradle. To ActiveSync with a host computer, use the SIngle Slot Serial/USB cradle. CAUTION Use only a Motorola approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative power supply will void the product warranty and may cause product damage. See the MC3000 User Guide for the power supply regulatory compliance statement. Setup Connect the Ethernet cradle (Ethernet port 1) to an Ethernet hub or a port on the host device. Connect the Ethernet cradle (power port) to a Motorola approved power supply. Ethernet Port 1 Power Port Ethernet Switch Connection Figure 2-5 Four Slot Ethernet Cradle Connection Ethernet Cradle Drivers (Windows CE 5.0) The Ethernet cradle drivers are pre-installed on the MC3000 and initiate automatically when the MC3000 is placed in a properly connected Four Slot Ethernet cradle. When the mobile computer is inserted into the Four Slot Ethernet cradle, the LAN icon indicates that the mobile computer is connected to a network.