Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 111
CLI: Configuring Area 1 as a Stub Area on A1, Enable OSPF area 0 on the 2/0/11.
View all Netgear GSM7328Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 CLI: Configuring Area 1 as a Stub Area on A1 Enable routing on the switch. (Netgear Switch) #config (Netgear Switch) (Config)#ip routing Set the router id to 1.1.1.1. (Netgear Switch) (Config)#router ospf (Netgear Switch) (Config-router)#router-id 1.1.1.1 Configure the area 0.0.0.1 as a stub area. (Netgear Switch) (Config-router)#area 0.0.0.1 stub Switch A only inject a default route to the area 0.0.0.1. (Netgear Switch) (Config-router)#no area 0.0.0.1 stub summarylsa (Netgear Switch) (Config-router)#exit Enable OSPF area 0 on the 2/0/11. (Netgear Switch) (Config)#interface 2/0/11 (Netgear Switch) (Interface 2/0/11)#routing (Netgear Switch) (Interface 2/0/11)#ip address 192.168.10.1 255.255.255.0 (Netgear Switch) (Interface 2/0/11)#ip ospf (Netgear Switch) (Interface 2/0/11)#exit Enable OSPF area 0.0.0.1 on the 2/0/19. (Netgear Switch) (Config)#interface 2/0/19 (Netgear Switch) (Interface 2/0/19)#routing (Netgear Switch) (Interface 2/0/19)#ip address 192.168.20.1 255.255.255.0 (Netgear Switch) (Interface 2/0/19)#ip ospf (Netgear Switch) (Interface 2/0/19)#ip ospf areaid 0.0.0.1 (Netgear Switch) (Interface 2/0/19)#exit OSPF v1.0, November 2008 9-17