Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 287
Log Port Configuration
View all Netgear GSM7328Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Log Port Configuration The example is shown as CLI commands and as a Web interface procedure. CLI: Logging Port Configuration (Netgear Switch Routing) #config (Netgear Switch Routing) (Config)#logging ? buffered cli-command console host syslog Buffered (In-Memory) Logging Configuration. CLI Command Logging Configuration. Console Logging Configuration. Enter IP Address for Logging Host Syslog Configuration. (Netgear Switch Routing) (Config)#logging host ? reconfigure remove Enter Logging Host IP Address Logging Host Reconfiguration Logging Host Removal (Netgear Switch Routing) (Config)#logging host 192.168.21.253 ? Press Enter to execute the command. Enter Port Id (Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ? Press Enter to execute the command. Enter Logging Severity Level (emergency|0, alert|1, critical|2, error|3, warning|4, notice|5, info|6, debug|7). (Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ? Press Enter to execute the command. (Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 (Netgear Switch Routing) #show logging hosts Index ----1 IP Address 192.168.21.253 Severity ---------alert Port ---4 Status Active Web Interface: Logging Port Configuration Syslog v1.0, November 2008 19-9