Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 31

Chapter 2 Using Ezconfig for Switch Setup Ezconfig is an interactive utility that provides a simplified procedure for setting up the following switch parameters: • Switch management IP address • Switch admin user password • Switch name and location Ezconfig can be entered either in Global Config mode (#) or in Display mode (>). The utility displays the following text when you enter the ezconfig command (FSM7352S) >ezconfig NETGEAR EZ Configuration Utility Hello and Welcome! This utility will walk you through assigning the IP address for the switch management CPU. It will allow you to save the changes at the end. After the session, simply use the newly assigned IP address to access the Web GUI using any public domain Web browser. Admin password not defined. Do you want to change the password? (Y/N/Q) Note: At any point in the setup, you can type Q to abort the program. At this point, Ezconfig will check if there is any change, and prompt you if the changes should be saved. Changing the Password The first question it will ask is whether you wish to change the admin password. For security reasons, you should change the password by typing Y. If you have already set the password and do not wish to change it 2-1 v1.0, November 2008