Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 272
Port Mirroring, no clibanner
View all Netgear GSM7328Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 To create a Pre-Login Banner, follow these steps: 1. On your PC, using Notepad create a banner.txt file that contains the banner to be displayed. Login Banner - Unauthorized access is punishable by law. 2. Transfer the file from the PC to the switch using TFTP (Netgear Switch Routing) #copy tftp://192.168.77.52/banner.txt nvram:clibanner Mode TFTP Set TFTP Server IP 192.168.77.52 TFTP Path TFTP Filename banner.txt Data Type Cli Banner Are you sure you want to start? (y/n) y CLI Banner file transfer operation completed successfully! (Netgear Switch Routing)#exit (Netgear Switch Routing) >logout Login Banner - Unauthorized access is punishable by law. User: Note: The no clibanner command removes the banner from the switch. Port Mirroring This section describes the Port Mirroring feature. Port Mirroring: • Allows you to monitor network traffic with an external network analyzer • Forwards a copy of each incoming and outgoing packet to a specific port • Is used as a diagnostic tool, debugging feature or means of fending off attacks • Assigns a specific port to copy all packets to • Allows inbound or outbound packets to switch to their destination and to be copied to the mirrored port 18-6 v1.0, November 2008 Tools