Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 184

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 13. Apply ACL 103 to port 24 and port 48: a. From the main menu, select Security > ACL > Advanced > IP Binding Configuration. A screen similar to the following displays. Figure 12-43 b. Under Binding Configuration, make the following selection and enter the following information: • Select 103 from the ACL ID pull-down menu. • In the Sequence Number field, enter 2. c. Click Unit 1. The ports display. Configure the following ports: • Click on the gray box under port 24. A flag appears in the box. • Click on the gray box under port 48. A flag appears in the box. d. Click Apply to save the settings. Set up a MAC ACL with Two Rules The example is shown as CLI commands and as a Web interface procedure. 12-38 v1.0, November 2008 Access Control Lists (ACLs)