Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 240

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 • Dynamically locked MAC addresses are eligible to be learned by another port • Static MAC addresses are not eligible for aging • Dynamically locked addresses can be converted to statically locked addresses Set the Dynamic and Static Limit on the Port 1/0/1 The example is shown as CLI commands and as a Web interface procedure. CLI: Setting the Dynamic and Static Limit on the Port 1/0/1 (Netgear Switch) (Config)#port-security Enable port-security globally (Netgear Switch) (Config)#interface 1/0/1 (Netgear Switch) (Interface 1/0/1)#port-security Enable port-security on port 1/0/1 (Netgear Switch) (Interface 1/0/1)#port-security max-dynamic 10 Set the dynamic limit to 10 (Netgear Switch) (Interface 1/0/1)#port-security max-static 3 Set the static limit to 3 (Netgear Switch) (Interface 1/0/1)#ex (Netgear Switch) (Config)#ex (Netgear Switch) #show port-security 1/0/1 Admin Dynamic Static Violation Intf Mode Limit Limit Trap Mode ------ ------- ---------- --------- ---------- 1/0/1 Disabled 10 3 Disabled Web Interface: Setting the Dynamic and Static Limit on the Port 1/0/1 1. To use the Web interface to enable port-security globally, proceed as follows: 16-2 v1.0, November 2008 Security Management