Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 337
CLI: Configuring Multiple STP (802.1s), Spanning Tree Protocol
View all Netgear GSM7328Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 CLI: Configuring Multiple STP (802.1s) (Netgear switch) (Config)# spanning-tree (Netgear switch) (Config)# spanning-tree forceversion 802.1s (Netgear switch) (Config)# spanning-tree mst instance 1 Create a mst instance 1 (Netgear switch) (Config)# spanning-tree mst priority 1 4096 (Netgear switch) (Config)# spanning-tree mst vlan 1 2 (Netgear switch) (Config)# spanning-tree mst vlan 1 3 Associate the mst instance 1 with the VLAN 2 and 3 (Netgear switch) (Config)# spanning-tree mst instance 2 Create a mst instance 2 (Netgear switch) (Config)# spanning-tree mst priority 2 4096 (Netgear switch) (Config)# spanning-tree mst vlan 2 11 (Netgear switch) (Config)# spanning-tree mst vlan 2 12 Associate the mst instance 2 with the VLAN 11 and 12 (Netgear switch) (Interface 1/0/3)# spanning-tree mst 1 port-priority 128 (Netgear switch) (Interface 1/0/3)# spanning-tree mst 1 cost 0 Web Interface: Configuring Multiple STP (802.1s) To use the Web interface to configure the managed switch, proceed as follows: 1. Enable 802.1s on the switch. a. From the main menu, select Switching > STP > STP Configuration.A screen similar to the following displays. Figure 26-5 b. Enter the following information in the STP Configuration. Spanning Tree Protocol v1.0, November 2008 26-5