Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 126
Web Interface: Configuring Area 1 as a nssa Area on A2
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Redistribute the rip routes into the OSPF. (Netgear Switch) (Config-router)#redistribute rip (Netgear Switch) (Config-router)#redistribute rip subnets Enable OSPF area 0.0.0.1 on the 1/0/15. (Netgear Switch) (Config-router)#exit (Netgear Switch) (Config)#interface 1/0/11 (Netgear Switch) (Interface 1/0/11)#routing (Netgear Switch) (Interface 1/0/11)#ip address 192.168.30.1 255.255.255.0 (Netgear Switch) (Interface 1/0/11)#ip rip (Netgear Switch) (Interface 1/0/11)#exit (Netgear Switch) (Config)#interface 1/0/15 (Netgear Switch) (Interface 1/0/15)#routing (Netgear Switch) (Interface 1/0/15)#ip address 192.168.20.2 255.255.255.0 (Netgear Switch) (Interface 1/0/15)#ip ospf (Netgear Switch) (Interface 1/0/15)#ip ospf areaid 0.0.0.1 (Netgear Switch) (Interface 1/0/15)#exit (Netgear Switch) (Config)#exit (Netgear Switch) #show ip route Total Number of Routes 6 Network Subnet Next Hop Address Mask Protocol Intf 0.0.0.0 0.0.0.0 OSPF Inter 1/0/15 192.168.20.0 255.255.255.0 Local 1/0/15 192.168.30.0 255.255.255.0 Local 1/0/11 192.168.40.0 255.255.255.0 RIP 1/0/11 192.168.41.0 255.255.255.0 RIP 1/0/11 192.168.42.0 255.255.255.0 RIP 1/0/11 Next Hop IP Address 192.168.20.1 192.168.20.2 192.168.30.1 192.168.30.2 192.168.30.2 192.168.30.2 Web Interface: Configuring Area 1 as a nssa Area on A2 To use the Web interface to configure OSPF on the switch, proceed as follows: 1. Enable IP routing on the switch: 9-32 v1.0, November 2008 OSPF