Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 156
Step 2: Con the GSM7352S (see
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Create an ACL that denies all the packets with TCP flags +syn-ack. (Netgear Switch) (Config)#access-list 101 deny tcp any any flag +syn -ack Create an ACL that permits all the IP packets. (Netgear Switch) (Config)#access-list 102 permit ip any any Apply the ACL 101 and 102 to the port 0/44; the sequence of 101 is 1 and of 102 is 2. (Netgear Switch) (Config)#interface 0/44 (Netgear Switch) (Interface 0/44)#ip access-group 101 in 1 (Netgear Switch) (Interface 0/44)#ip access-group 102 in 2 (Netgear Switch) (Interface 0/44)#exit Step 2: Configure the GSM7352S (see Figure 12-7) To use the CLI to Configure the GSM7352S, enter the following CLI commands: Create VLAN 40 with port 1/0/24 and assign IP address 192.168.40.1/24. (Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 40 (Netgear Switch) (Vlan)#vlan routing 40 (Netgear Switch) #configure (Netgear Switch) (Config)#interface 1/0/24 (Netgear Switch) (Interface 1/0/24)#vlan pvid 40 (Netgear Switch) (Interface 1/0/24)#vlan participation include 40 (Netgear Switch) (Interface 1/0/24)#exit (Netgear Switch) (Config)#interface vlan 40 (Netgear Switch) (Interface-vlan 40)#routing (Netgear Switch) (Interface-vlan 40)#ip address 192.168.40.1 255.255.255.0 (Netgear Switch) (Interface-vlan 40)#exit 12-10 v1.0, November 2008 Access Control Lists (ACLs)