Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 53
Create a Protocol-based VLAN
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 b. Enter the following information in the MAC Based VLAN Configuration. • Enter 00:00:0A:00:00:02 in the MAC Address field. • Enter 3 in the PVID(1 to 4093) field. c. Click Add. Create a Protocol-based VLAN Create two protocol vlan groups, one is for IPX and the other is for IP/ARP. The untagged IPX packets is assigned to VLAN 4, and the untagged IP/ARP packets is assigned to VLAN 5. CLI: Creating a Protocol-based VLAN Create a vlan protocol group vlan_ipx based on IPX protocol. (Netgear Switch)#config (Netgear Switch)(Config)#vlan protocol group vlan_ipx (Netgear Switch)(Config)#vlan protocol group add protocol 1 ipx Create a vlan protocol group vlan_ipx based on IP/ARP protocol. (Netgear Switch)(Config)#vlan protocol group vlan_ip (Netgear Switch)(Config)#vlan protocol group add protocol 2 ip (Netgear Switch)(Config)#vlan protocol group add protocol 2 arp (Netgear Switch)(Config)#exit Assign vlan protocol group 1 to VLAN 4. (Netgear Switch)#vlan database (Netgear Switch)(Vlan)#vlan 4 (Netgear Switch)(Vlan)#vlan 5 (Netgear Switch)(Vlan)#protocol group 1 4 Assign vlan protocol group 2 to VLAN 5. (Netgear Switch)(Vlan)#protocol group 2 5 Virtual LANs v1.0, November 2008 4-13