Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 66
CLI: Enabling Routing for Ports on the Switch, Web Interface: Enabling Routing for Ports on
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 CLI: Enabling Routing for Ports on the Switch (Netgear Switch) #config (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#routing (Netgear Switch) (Interface 1/0/2)#ip address 192.150.2.1 255.255.255.0 (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#routing (Netgear Switch) (Interface 1/0/3)#ip address 192.150.3.1 255.255.255.0 (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) (Config)#interface 1/0/5 (Netgear Switch) (Interface 1/0/5)#routing (Netgear Switch) (Interface 1/0/5)#ip address 192.150.5.1 255.255.255.0 (Netgear Switch) (Interface 1/0/5)#exit (Netgear Switch) (Config)#exit Web Interface: Enabling Routing for Ports on the Switch To use the Web interface to configure the managed switch, proceed as follows: 1. Assign IP address 192.150.2.1/24 to the interface 1/0/2. a. From the main menu, select Routing > Advanced >IP Interface Configuration. A screen similar to the following displays. Figure 6-3 b. Under IP Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that interface. 1/0/2 now appears in the Interface field at the top. c. Under the IP Interface Configuration, enter the following information. 6-4 Port Routing v1.0, November 2008