Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 133
Web Interface: VLAN Routing OSPF Configuration, following displays.
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Enable OSPF for the VLAN and physical router ports. (Netgear Switch) (Config)#interface vlan 10 (Netgear Switch) (Interface vlan 10)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface vlan 10)#ip ospf (Netgear Switch) (Interface vlan 10)#exit (Netgear Switch) (Config)#interface vlan 20 (Netgear Switch) (Interface vlan 20)#ip ospf areaid 0.0.0.3 (Netgear Switch) (Interface vlan 20)#ip ospf (Netgear Switch) (Interface vlan 20)#exit Set the OSPF priority and cost for the VLAN and physical router ports. (Netgear Switch) (Config)#interface vlan 10 (Netgear Switch) (Interface vlan 10)#ip ospf priority 128 (Netgear Switch) (Interface vlan 10)#ip ospf cost 32 (Netgear Switch) (Interface vlan 10)#exit (Netgear Switch) (Config)#interface vlan 20 (Netgear Switch) (Interface vlan 20)#ip ospf priority 255 (Netgear Switch) (Interface vlan 20)#ip ospf cost 64 (Netgear Switch) (Interface vlan 20)#exit (Netgear Switch) (Config)#exit Web Interface: VLAN Routing OSPF Configuration To use the Web interface to configure OSPF on the switch, proceed as follows: 1. Configure a VLAN and include ports 1/0/2 in the VLAN. a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following displays. Figure 9-45 OSPF v1.0, November 2008 9-39