Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 150

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Define the second rule for ACL 101 to set similar conditions for UDP traffic as for TCP traffic. (Netgear Switch) (Config)#access-list 101 permit udp 192.168.77.0 0.0.0.255 192.178.77.0 0.0.0.255 Apply the rule to inbound traffic on port 1/0/2. Only traffic matching the criteria will be accepted. (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#ip access-group 101 in (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#exit Web Interface: Setting up an IP ACL with Two Rules To use the Web interface to configure IP ACL on a port on the switch, proceed as follows: 1. Create IP ACL 101 on the switch: a. From the main menu, select Security > ACL > IP ACL. A screen similar to the following displays. Figure 12-2 b. In the IP ACL ID field, enter 101. c. Click Add to create ACL 101. 2. Create a new rule associated with the ACL 101. a. From the main menu, select Security > ACL >IP ACL> IP Extended Rules. A screen similar to the 12-4 v1.0, November 2008 Access Control Lists (ACLs)