Netgear GSM7352Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 79
Web Interface: Setting Up VLAN Routing for the VLANs and the Switch
View all Netgear GSM7352Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 Enable routing for the switch: (Netgear Switch) #config (Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#exit The next sequence shows an example of configuring the IP addresses and subnet masks for the virtual router ports. (Netgear Switch) (Config)#interface vlan 10 (Netgear Switch) (Interface-vlan 10)#ip address 192.150.3.1 255.255.255.0 (Netgear Switch) (Interface-vlan 10)#exit (Netgear Switch) (Config)#interface vlan 20 (Netgear Switch) (Interface-vlan 20)#ip address 192.150.4.1 255.255.255.0 (Netgear Switch) (Interface-vlan 20)#exit (Netgear Switch) (Config)#exit Web Interface: Setting Up VLAN Routing for the VLANs and the Switch To use the Web interface to configure the managed switch, proceed as follows: 1. From the main menu, select Routing > VLAN> VLAN Routing > VLAN Routing Configuration. A screen similar to the following displays. Figure 7-8 2. Under the VLAN Routing Configuration, enter the following information. • Select 10 from the VLAN ID(1 to 4093) pull-down menu. • In the IP Address field, enter 192.150.3.1. • In the Subnet Mask filed, enter 255.255.255.0. 3. Click Add to save the settings. VLAN Routing 7-7 v1.0, November 2008