Netgear WGR614v9 WGR614v9 User Manual - Page 103

Wireless Settings, Name SSID, b and g, The default SSID is NETGEAR. - access point mode

Get Netgear WGR614v9 - 54 Mbps Wireless Router PDF manuals and user guides View all Netgear WGR614v9 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

Wireless-G Router WGR614v9 Reference Manual 1. Select Wireless Settings under Setup in the main menu of the WGR614v9 router. Figure 7-1 2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR. Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the SSID of any wireless access adapters must match the SSID you specify in the Wireless-G Router. If they do not match, you will not get a wireless connection to the Wireless-G Router. 3. Select the region in which the wireless interface will operate. 4. Set the channel. The default channel is Auto. This field determines which operating frequency is used. It should not be necessary to change the wireless channel unless you notice interference problems with another nearby wireless router or access point. Select a channel that is not being used by any other wireless networks within several hundred feet of your router. For more information about the wireless channel frequencies, click the link to the online document "Wireless Networking Basics" in Appendix B. 5. Set the mode to b and g. Troubleshooting v1.1, May 2008 7-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Wireless-G Router WGR614v9 Reference Manual
Troubleshooting
7-11
v1.1, May 2008
1.
Select
Wireless Settings
under Setup in the main menu of the WGR614v9 router.
2.
For the wireless network name (SSID), use the default name, or choose a suitable descriptive
name. In the
Name (SSID)
field, you can enter a value of up to 32 alphanumeric characters.
The default SSID is NETGEAR.
3.
Select the region in which the wireless interface will operate.
4.
Set the channel. The default channel is
Auto
.
This field determines which operating frequency is used. It should not be necessary to change
the wireless channel unless you notice interference problems with another nearby wireless
router or access point. Select a channel that is not being used by any other wireless networks
within several hundred feet of your router. For more information about the wireless channel
frequencies, click the link to the online document
“Wireless Networking Basics” in
Appendix B
.
5.
Set the mode to
b and g
.
Figure 7-1
Note:
The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the
SSID of any wireless access adapters must match the SSID you specify in the
Wireless-G Router. If they do not match, you will not get a wireless connection
to the Wireless-G Router.