Netgear WGR614v9 WGR614v9 User Manual - Page 31
Configuring WEP Wireless Security, Channel, Security Options, Apply, Open System, Shared Key - extender
View all Netgear WGR614v9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Wireless-G Router WGR614v9 Reference Manual • Channel. This field determines which operating frequency is used. It should not be necessary to change the wireless channel unless you notice interference problems with another nearby wireless network. The wireless router uses channel bonding technology to extend the bandwidth for data transmission. For more information about the wireless channel frequencies, see the online document that you can access from "Wireless Networking Basics" in Appendix B. • Mode. This field determines which data communications protocol is used. You can choose from: b and g; or g only. • Security Options. The selection of wireless security options can significantly affect your network performance. The time it takes to establish a wireless connection can vary depending on both your security settings and router placement. WEP connections can take slightly longer to establish. Also, WEP, WPA-PSK, and WPA2PSK encryption can consume more battery power on a notebook computer, and can cause significant performance degradation with a slow computer. Instructions for configuring the security options can be found in "Choosing Appropriate Wireless Security" on page 2-1. A full explanation of wireless security standards is available in the online document that you can access from "Wireless Networking Basics" in Appendix B. 3. Click Apply to save your settings. Configuring WEP Wireless Security WEP Shared Key authentication and WEP data encryption can be defeated by a determined eavesdropper using publicly available tools. WEP offers the following options: • Open System. With Open System authentication and 64 or 128 bit WEP data encryption, the Wireless-G Router does perform data encryption but does not perform any authentication. Anyone can join the network. This setting provides very little practical wireless security. • Shared Key. With Shared Key authentication, a wireless device must know the WEP key to join the network. Select the encryption strength (64 or 128 bit data encryption). Manually enter the key values, or enter a word or group of printable characters in the Passphrase field. Manually entered keys are not case-sensitive, but passphrase characters are case-sensitive. Safeguarding Your Network 2-7 v1.1, May 2008