Nikon 1768 Instruction Manual - Page 13
Installing, Batteries
View all Nikon 1768 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
INSTALLING BATTERIES • Make sure the power switch is set at OFF position . • NiCd batteries that have "+" terminals exceeding 6mm in diameter cannot be used. • Manganese batteries are not recommended for use at low temperatures . • See page 133 for "NOTES ON BATTER IES." 1 Loosen battery holder lock screw with a coin or similar object. 2 Remove battery holder. 3 Install four AA-type alkalinemanganese, NiCd or highperformance manganese batteries with "+" and "-" terminals positioned as shown inside holder. 4 Retum battery holder to battery chamber. 5 Press holder into place as you tighten lock screw with coin. 13
INSTALLING
BATTERIES
• Make sure the power switch is set
at OFF position .
• NiCd batteries that have
"+"
terminals exceeding 6mm
in
diameter cannot
be
used.
• Manganese batteries are not
recommended for use at low
temperatures.
• See page 133 for "NOTES
ON
BATTERIES."
3
Install four AA-type alkaline-
manganese, NiCd
or
high-
performance manganese batteries with
"+"
and
"-"
terminals positioned as
shown inside holder.
1
4
Loosen battery holder lock screw
with a coin or similar object.
Retum battery holder to battery
chamber.
2
Remove battery holder.
5
Press holder into place as you
tighten lock screw with coin.
13