Nikon COOLPIX S9300 Reference Manual - Page 125

Using 3D Photography The camera takes one picture for each eye to simulate a three-dimensional image on a 3D-compatible TV or monitor. Rotate the mode dial to y M d button M s 3D photography 1 Frame the subject. • The focus area that the camera focuses on can be moved to areas other than the center of the frame. To move the focus area, press the k button before taking the first picture, and then rotate the multi selector or press H, I, J, or K. To adjust the following settings, press the k button to temporarily cancel focus area selection, and then adjust each setting. - Macro mode - Exposure compensation 29m 0s 8610 2 Press the shutter-release button to take the first picture. • The focus, exposure and white balance are locked after the first shot, and R is displayed on the monitor. 3 Move the camera horizontally to the right until the translucent guide is aligned with the subject. • To cancel shooting, press the k button. Cancel 4 Wait for the camera to automatically release the shutter. • The camera automatically takes the second picture when it detects that the subject is aligned with the guide. • Shooting is canceled if the subject is not aligned with the guide within 10 seconds. Reference Section E5