Nikon D50 D50 User's Manual - Page 90
Preset, Measure, value, and the new value will be used when
View all Nikon D50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
3 Press the shutter-release button halfway to return to shooting mode. 4 Press the (WB) button until a blinking appears in the control panel and viewfinder. Setup Shooting Options: The Shooting Menu 5 Frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus. To exit without measuring a new value for white balance, press the (WB) button. 6 If the camera was able to measure a value for white balance, will flash in the con- trol panel, while the viewfinder will show a flashing . White balance is set to the new value, and the new value will be used when- ever Preset > Measure is selected for white balance. If lighting is too dark or too bright, the cam- era may be unable to measure white balance. A flashing will appear in the control panel and viewfinder. Return to Step 4 and measure white balance again. 80