Nikon D7000 D7000 User's Manual - Page 305

❚❚ "Clean at Startup/Shutdown" Choose from the following options: Option Description 5 Clean at startup The image sensor is automatically cleaned each time the camera is turned on. 6 Clean at shutdown The image sensor is automatically cleaned during shutdown each time the camera is turned off. 7 Clean at startup & shutdown The image sensor is cleaned automatically at startup and at shutdown. 8 Cleaning off Automatic image sensor cleaning off. 1 Select Clean at startup/shutdown. Display the Clean image sensor menu as described in Step 2 on the previous page. Highlight Clean at startup/shutdown and press 2. 2 Select an option. Highlight an option and press J. D Image Sensor Cleaning Using camera controls interrupts image sensor cleaning. Image sensor cleaning may not be performed at startup if the flash is charging. Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using the options in the Clean image sensor menu, clean the image sensor manually (0 286) or consult a Nikon-authorized service representative. If image sensor cleaning is performed several times in succession, image sensor cleaning may be temporarily disabled to protect the camera's internal circuitry. Cleaning can be performed again after a short wait. n 285