Oki C5100n OKI C5100 User's Guide - Page 78

System Configuration Menu Note: Factory default settings are shown in bold. Items POW SAVE TIME CLEARABLE WARNING MANUAL TIMEOUT WAIT TIMEOUT LOW TONER JAM RECOVERY ERROR REPORT Settings 5 15 30 60 240 ON JOB OFF 30 60 5 to 300 SEC Default = 90 seconds CONTINUE STOP ON OFF ON OFF Explanation Adjusts the time before the printer automatically switches into power saving mode. In this mode power consumption is reduced, but when a job is sent the printer will require a warm-up time of up to 1 minute before printing can begin. When ON, non-critical warnings, such as requests for a different paper size, can be cleared by pressing the ON LINE button. When set to JOB, they are only cleared when the print job resumes. Specifies how many seconds the printer will wait for paper to be fed before cancelling the job. Specifies how many seconds the printer will wait when received data pauses before forcing a page eject. Specifies whether the printer should continue printing after a low toner condition is detected. If you change this to STOP, when low toner is detected, the printer goes off line. Specifies whether the printer should perform jam recovery after a paper jam has occurred. If ON, the printer will attempt to print again any pages lost due to a paper jam once the jam has been cleared. Change this to ON if you wish the printer to print the error details when an error occurs. C5100: Menu Functions • 78