Oki C5100n OKI C5100 User's Guide - Page 80
Network Menu cont., Factory default settings are shown
View all Oki C5100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Network Menu (cont.) Note: Factory default settings are shown in bold. Item Settings Explanation IP ADDRESS AUTO SET MANUAL IP ADDRESS xxx.xxx.xxx.xxx Default = 198.168.100.100 SUBNET MASK xxx.xxx.xxx.xxx Default = 255.255.255.000 GATEWAY ADDRESS xxx.xxx.xxx.xxx Default = 192.168.100.254 INITIALIZE NIC? [EXECUTE] WEB/IPP ENABLE DISABLE TELNET ENABLE DISABLE Change this to Manual to specify the IP address through the front panel.(see next entry) Required for non-DHCP networks. Current assigned IP address. To change: • Press ENTER. • Use +/- keys to increment first octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment second octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment third octet. • Press ENTER to move on to the last octet. • Use +/- keys to increment 1st octet. • Press ENTER to register the new address. Current assigned subnet mask. To change, proceed as above. Current assigned gateway address. To change, proceed as above. Initializes the network card. Enables or disables Web config. facility and Internet Printing Protocol. This item will not appear in the menu if TCP/IP is set to DISABLE. Enables or disables Telnet config. facility. This item will not appear in the menu if TCP/IP is set to DISABLE. C5100: Menu Functions • 80