Oki C710n Network User's Guide, English - Page 78
Enable, PrintServer
View all Oki C710n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
CANNOT PRINT WITH LPR AND FTP Turn the printer off for 15 seconds and then on again. Check there is a response to the ping command. Check the network cable is correctly connected. Change the cable and try again. Check the host name and IP address are configured in the workstation. Check the printer port name is configured in the workstation. There are three port names: lp, euc and sjis. Use lp by default as euc and sjis are specific to PostScript printers. INCORRECT USER NAME ON THE BANNER PAGE If printing with lpr, the user name printed is unknown and the filename printed is the Spool file name. If printing with FTP, the user name printed is the user name entered during FTP login and the file name printed is the transmitted file name. If the print directory name is indicated in the put command, the file name is not printed. The printer name printed is the logical directory name. NETBEUI THE NETWORK INTERFACE CARD IS NOT IDENTIFIED. Turn the printer off for 15 seconds and then on again. Check the network cable is correctly connected. Change the cable and try again. Check Microsoft Network Client and NetBEUI have been added to the network section of the Windows Control Panel. Check the NetBEUI protocol is set to Enable. Check the factory setting of the workgroup name is PrintServer and the computer name is ML+ the last six characters of the MAC address. Check the computer name of the NIC is different from the computer name on the network. Troubleshooting> 78