Olympus 225840 Stylus 730 Advanced Manual (English) - Page 60
Select [POWER OFF] and press
UPC - 050332158245
View all Olympus 225840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Getting to know your camera better Monitor indication q WRITE-PROTECT > MEMORY FULL q CARD FULL L NO PICTURE r PICTURE ERROR r THE IMAGE CANNOT BE EDITED CARD-COVER OPEN g BATTERY EMPTY CARD SETUP POWER OFF FORMAT SET OK MEMORY SETUP [IN] POWER OFF MEMORY FORMAT SET OK Possible cause Writing to the card is prohibited. The internal memory has no available memory and cannot store any new data. The card has no available memory and cannot store any new data. Corrective action The recorded image has been protected (read-only) on a computer. Download the image to a computer and cancel the readonly setting. Insert a card or erase unwanted data. Before erasing, backup the data of important pictures onto the card, or download such pictures to a computer. Replace the card or erase unwanted data. Before erasing, download important pictures to a computer. There are no pictures in the internal memory or on the card. There is a problem with the selected picture and it cannot be played back on this camera. Pictures taken by other cameras, or previously edited or corrected pictures cannot be edited or fixed. The internal memory or the card contains no pictures. Record pictures. Use image processing software to view the picture on a computer. If that cannot be done, the image file is damaged. Use image processing software to edit the pictures. The battery compartment/ card cover is open. Close the battery compartment/card cover. The battery is empty. Charge the battery. This card cannot be used in this camera, or the card is not formatted. Format the card or replace. • Select [POWER OFF] and press . Insert a new card. • Select [FORMAT] [YES] and press . All data on the card is erased. There is an error in the internal memory. Select [MEMORY FORMAT] [YES] and press . All data in the internal memory is erased. NO CONNECTION NO PAPER The camera is not connected Disconnect the camera and connect it again to the printer correctly. correctly. There is no paper in the printer. Load some paper in the printer. The printer has run out of ink. Replace the ink cartridge in the printer. NO INK JAMMED The paper is jammed. Remove the jammed paper. 60 EN