Olympus E10 E-10 Instructions (English) - Page 114

Taking Multiple Exposures With the camera in the sequential mode, press and hold down the shutter button to take four rapid shots. 1 2 3 OFF ON 1 Set the mode dial to P, A, S, or M. 2 Press and hold down the drive button , and then turn the main dial or sub dial until you see the sequential mode mark appear in the control panel. 3 Take the picture. The camera will continue to shoot exposures as long as you hold down the shutter button. The camera will stop shooting if you lift your finger from the shutter button. The number of multiple exposures is displayed in the control panel. Control panel Sequential mode mark Number of storable pictures Number of multiple exposures (Gauge shows 3 exposures) Camera will not shoot after pressing shutter button? blinking in the viewfinder? If this mark is blinking, the built-in flash is charging. Wait for the mark to stop flashing. After the flash is charged, the flash mark will light and remain on. and number of storable pictures blinking? If the card error and the number of storable pictures is blinking, this means the memory card is full. Replace the full card with another card, or delete pictures from the full card that are no longer needed. 112