Olympus E10 E-10 Instructions (English) - Page 120
Using Time-Lapse Photography
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Using Time-Lapse Photography You can use the menu to switch on the time lapse mode and select the timer interval between automatic exposures. For example, if you set the time interval for 5 minutes, you can capture each stage of a flower opening in the morning. You can set the time interval in minutes for the shooting session within the range 1 minute up to 24 hours. The actual time between shots may differ slightly from the time interval setting. (See "Actual time interval" on page 120.) The camera will continue to take pictures in the time lapse mode until the batteries discharge or until the memory card fills up. To cancel time lapse photography, just switch the camera off and on. OFF ON 1 2 34 5 1 Set the mode dial to P, A, S, or M. 2 Attach the camera securely to a tripod, and then compose the picture in the viewfinder. Open the built-in flash, set the zoom, set up the exposure compensation, adjust the focus or any other features required for the pictures that you want to take. 3 Pull down the eyepiece shutter lever to prevent light entering the viewfinder from behind the camera. 4 Press the menu button . The menu opens in the monitor. 5 On the arrow pad, press or to move the green highlight to the time interval mark . 6 On the arrow pad, press move the green highlight to the right. The previously selected time interval is displayed. 6 118