Olympus E10 E-10 Instructions (English) - Page 54

Switching the Camera Off Always switch the camera off immediately after every shooting session. If you leave the camera on while it is not being used, it will automatically enter the sleep mode and then automatically switch itself off after one hour. (© 128) Always switch the camera off before changing batteries or before storing the camera in a case or bag. OFF ON 1 1 Move the power switch to OFF. The camera switches off. If an image is being saved on a card (the card access lamp will be blinking), the camera will not power off until the image has been saved on the card. 2 Attach the lens cap. Press inward on the cap's latches, fit the cap over the lens, and then release the latches. (To remove the cap: Press on the latches and pull the cap off.) 2 Caution While the card access lamp is blinking, never open the card compartment cover or unplug the AC adapter. If the power supply to the camera is interrupted while the camera is saving a picture on a card, this could cause the camera to reset all operation mode settings (date, time, etc.), could damage images already stored on the card, or could prevent other pictures from being saved on the card. 52