Olympus E10 E-10 Instructions (English) - Page 91
When the flash is not required
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
2 1 1 Press the flash button . The built-in flash opens. If the built-in flash is not raised, the flash mode remains set at OFF and cannot be changed. 2 Press and hold down the flash mode button , and then turn the main dial or the sub dial. Continue to turn the dial until you see the desired combination of flash control setting marks, and then stop turning the dial. 6 3 Take the picture. When the flash is not required When you do not want to use the flash, for example when photographing subjects as a sunset or night scene, shooting a subject that the flash will not reach, or shooting a subject in a location where flash photography is not allowed (such as in a museum), just press down the built-in flash to close it. If an external flash unit is connected to the camera, switch it off or remove it. (Some external flash units may require removal and others may not; you can just switch them off.) 89