Olympus E10 E-10 Instructions (English) - Page 38
Framing a picture with the viewfinder - flash
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Holding the Camera In this section you will learn how to hold the camera when shooting pictures. Framing a picture with the viewfinder Diopter adjustment ring AF target mark Viewfinder Holding the Camera Horizontal grip Vertical grip Incorrect! Finger blocking AF port Finger blocking flash Finger blocking the lens 36 1 Adjust the viewfinder display for your own eyesight. Look at the AF target mark in the viewfinder. If the AF target mark is blurry or otherwise difficult to see, turn the diopter adjustment ring as shown in the illustration until the AF target mark is sharp and clear. 2 Grip the camera. Grip the camera with both hands with your arms and elbows down at your sides. Make sure that your fingers or the strap do not block the lens, built-in flash, or AF port. 3 Compose the picture in the viewfinder. The picture that you take will be 5% larger around the edges than what you see through the viewfinder. (The viewfinder displays 95% of the composed picture.) Cannot see through the viewfinder? • Make sure that the lens cover has been removed. • Check the eyepiece shutter lever on the left side of the viewfinder. If it is down, raise it. (© 14) When the subject in the viewfinder is dark • Check the power switch. If the power switch is at the OFF position, move it to ON. If the power is off with the power switch in the ON position, the camera may have powered itself off. Move to OFF then move to ON again. Note • Do not subject the lens to physical shocks.