Olympus E10 E-10 Instructions (English) - Page 173
Disconnecting the USB cable
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Disconnecting the USB cable Windows 98, Mac OS Make sure that the card access lamp on the camera is off, and then disconnect the USB cable as follows. Windows 2000 Follow one of the procedures below. (1) Single-clicking the icon on the Taskbar. 1 Click the Unplug or Eject Hardware icon on the Taskbar in the lower right corner of the desktop. (See illustration below.) 2 When the message to halt the drive appears, click this message. 3 When the Unplug Hardware message tells you that the device can be removed safely, click the OK button. 4 Disconnect the cable. (2) Double-clicking the icon on the Taskbar. 1 Double-click the Unplug or Eject Hardware icon on the Taskbar in the lower right corner of the desktop. 2 When the Unplug Hardware dialog box opens, click the name of the camera in the hardware device list, and then click the Stop button. 3 When the Unplug Hardware message tells you that the device can be removed safely, click the OK button. 4 Disconnect the cable. 12 Note • To avoid problems, never change the camera's mode or switch the camera off and on while the camera is connected to the computer, especially when images are being transferred from the camera to the computer. • The camera does not enter sleep mode or automatically switch off the power while operating in setup/connection mode. If you intend to leave the camera connected to the computer for a long time, we recommend connecting the optional AC adapter to avoid draining of the batteries. 171