Olympus E10 E-10 Instructions (English) - Page 93

5 Displayed only when an exposure value other than 0 is selected. Control panel 5 Press the button. The green highlight returns to the flash control mark and the setting is stored. When any value other than zero (0) is selected, the flash control mark is displayed in the control panel. Please remember that this setting is retained even after the camera is switched off and switched on again. To release this setting, reset the value for zero. 6 Press the button again to close the menu. 6 Take the picture. To use the dedicated external flash and built-in flash together When the dedicated external flash is mounted on the camera, the camera automatically sets the flash for TTL-AUTO. With this setting, the camera can adjust the intensity of the flash fired from the dedicated flash, just as it automatically adjusts the flash intensity for the built-in flash. If you set the dedicated flash for MANUAL, this disables automatic adjustment of the flash intensity only for the dedicated external flash; the intensity of the built-in flash will continue to be controlled by the camera. 91