Olympus E10 E-10 Instructions (English) - Page 118
Using the Remote Cable RM-CB1, Optional
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Using the Remote Cable RM-CB1 (Optional) When you are shooting in the macro, TELE, or bulb mode with a slow shutter speed, you can mount the camera on a tripod and use the optional Remote Cable RM-CB1 to prevent camera shake caused by pressing the shutter button with your finger. The remote cable is connected to the remote cable jack on the camera. You can also half-press the shutter button and lock the exposure and then release the shutter button with the remote cable, or execute a slow shutter release in the bulb mode. 1 2 3 1 Set the mode dial to P, A, S, or M. 2 Attach the camera securely to a tripod and compose the picture in the viewfinder. 3 Remove the cap from the remote cable jack on the camera, and then insert the jack of the remote cable into the camera. Keep the cap in a safe place where you can find it. The remote cable is equipped with a small screw so you can attach the cap to the cable. 4 If you are not going to use the viewfinder to take the picture, pull down the eyepiece shutter lever to prevent light entering the viewfinder from behind the camera. Light entering the viewfinder from behind the camera could wash out the picture with white light. 4 116 Eyepiece shutter lever