Olympus E10 E-10 Instructions (English) - Page 135

Using an Optional Conversion Lens The conversion lenses listed below can be attached to this camera. When you use a conversion lens, set the zoom setting (TELE or WIDE) on the camera and make sure that the mark is displayed in the control panel. With the mark displayed, the camera can use the correct methods to set the focus and exposure for the conversion lens. If you attempt to use a conversion lens with the camera without the mark displayed, the camera may not be able to set the correct focus and exposure. The following conversion lenses can be used with this camera. Conversion Lens Type Attachment Method Zoom Setting Control Panel Display 3x Extension Lens Tele 300 Pro TCON-300 F2.8 f=420mm equivalent Filter diameter 49mm Complete Multi-Coat Support arm TELE 8 flashing 1.45x Tele Extension Lens Pro TCON-14B F2.4 f=200mm equivalent Filter diameter 86mm Complete Multi-Coat Screw TELE 0.8x Wide Extension Lens Pro WCON-08B F2 f=28mm equivalent Filter diameter 105mm Complete Multi-Coat Screw WIDE illuminated Macro Extension Lens Pro MCON-35 F2~F2.4 Possible to shoot area up to size of a business card Filter diameter 72mm Complete Multi-Coat Screw WIDE~TELE Note • Using the built-in flash could cause shadows in the image and should not be used. • If you use a thick filter, such as a PL filter, or combinations of filters, the areas around the circumference of the image could become dark. Filters can be attached to the camera, but the results of shooting with a filter cannot be guaranteed. 133