Olympus SP 500 SP-500 UZ Advanced Manual (English) - Page 154
Set [AF ILLUMINATOR] to [ON]., Set the date/time. The clock is not preset.
UPC - 050332156173
View all Olympus SP 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Troubleshooting Possible cause Corrective action The viewfinder does not turn on. The monitor is turned on. Press u to switch to the viewfinder. The monitor does not turn on. The viewfinder is turned Press u to switch to the monitor. on. The viewfinder or monitor is hard to see. There is condensation* inside the camera. Turn the camera off. Before turning it on again, wait until the camera adjusts to the surrounding temperature and dries out. The brightness of the monitor is not adjusted properly. Use [s] to adjust the brightness. The monitor is exposed Block the sunlight with your hand or use the to direct sunlight. viewfinder. Vertical lines appear on Aiming the camera at a bright subject in the monitor screen sunlight may cause vertical lines to appear during shooting. on the screen. This is not a malfunction. The date recorded with the image data is wrong. The date and time is not Set the date/time. The clock is not preset. set. The camera has been left without batteries. If the camera is left for 3 days without batteries, the date and time setting is canceled. Set the date and time again. The picture is out of focus. The subject was too close. Move further away from the subject. To take pictures closer than 7 cm (2.8 in.) with the zoom in the maximum wide position, use the super macro mode. The subject is dark. Set [AF ILLUMINATOR] to [ON]. Auto focus is not possible. There is condensation* inside the camera. Use manual focus or focus lock to focus on the subject and then shoot. Turn the camera off. Before turning it on again, wait until the camera adjusts to the surrounding temperature and dries out. Ref. page P. 12 P. 12 - P. 110 - - P. 111 P. 111 P. 40 P. 56 P. 23, 53 - Appendix 10 154