Olympus SP 500 SP-500 UZ Advanced Manual (English) - Page 69

Recording sound with still pictures

Page 69 highlights

Recording sound with still pictures 1 Use the arrow pad to choose at which edge you want to connect the pictures. q : The next picture is connected at the right edge. p : The next picture is connected at the left edge. s : The next picture is connected at Connects pictures from left to right the top. r : The next picture is connected at the bottom. 2 Make sure that the edges of the pictures overlap, then take the pictures. • The focus, exposure and white balance are set by the first picture. Do not select an extremely bright subject (such as the sun) for the first picture. • You cannot adjust the zoom after the first picture. • Panorama shooting is possible for up to 10 pictures. When you have taken 10 pictures, a warning mark g is displayed. 5 3 Press Z to exit panorama shooting. Note • Panorama mode is not available when there is no card in the camera. Panorama mode is only available with Olympus cards. • During panorama shooting, the flash, sequential shooting, and recording sound with still pictures are not available. • The camera itself cannot connect panorama pictures. The OLYMPUS Master software is necessary to connect the pictures. Additional shooting functions Recording sound with still pictures Sound can be recorded when taking still pictures. Recording starts about 0.5 seconds after the shutter is released and lasts about 4 seconds. When this function is enabled, sound is recorded automatically every time you take a picture. Top menu [MODE MENU] [CAMERA] [R] [ON] g"Using the menus" (P. 17) 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189

Recording sound with still pictures
69
5
Additional shooting functions
1
Use the arrow pad to choose at
which edge you want to
connect the pictures.
q
:
The next picture is connected at
the right edge.
p
:
The next picture is connected at
the left edge.
s
:
The next picture is connected at
the top.
r
:
The next picture is connected at the bottom.
2
Make sure that the edges of the pictures overlap, then take
the pictures.
The focus, exposure and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
You cannot adjust the zoom after the first picture.
Panorama shooting is possible for up to 10 pictures. When you have taken
10 pictures, a warning mark
g
is displayed.
3
Press
Z
to exit panorama shooting.
Sound can be recorded when taking still pictures. Recording starts about
0.5 seconds after the shutter is released and lasts about 4 seconds.
When this function is enabled, sound is recorded automatically every time
you take a picture.
Top menu
[MODE MENU]
[CAMERA]
R
]
[ON]
g
“Using the menus” (P. 17)
Note
Panorama mode is not available when there is no card in the camera.
Panorama mode is only available with Olympus cards.
During panorama shooting, the flash, sequential shooting, and recording sound
with still pictures are not available.
The camera itself cannot connect panorama pictures. The OLYMPUS Master
software is necessary to connect the pictures.
Connects pictures from
left to right
Recording sound with still pictures