Onkyo TX-NR3009 Owner Manual

Onkyo TX-NR3009 Manual

Get Onkyo TX-NR3009 PDF manuals and user guides View all Onkyo TX-NR3009 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo TX-NR3009 manual content summary:

  • Onkyo TX-NR3009 | Owner Manual - Page 1
    AV Receiver Contents Introduction 2 TX-NR5009 TX-NR3009 Connections 12 Turning On & Basic Operations ....24 Instruction Manual Advanced Operations 47 Controlling Other Components ......76 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making
  • Onkyo TX-NR3009 | Owner Manual - Page 2
    USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat issues
  • Onkyo TX-NR3009 | Owner Manual - Page 3
    by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit
  • Onkyo TX-NR3009 | Owner Manual - Page 4
    this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY K. MIYAGI ONKYO EUROPE ELECTRONICS GmbH ■ Aiming the remote controller To use the remote controller, point it at the AV receiver's remote
  • Onkyo TX-NR3009 | Owner Manual - Page 5
    Macros 84 Appendix Troubleshooting 85 Firmware Update 91 Connection Tips and Video Signal Path 94 Using an RIHD-compatible TV, Player, or Recorder 97 About HDMI 99 Network/USB Features 100 Specifications (TX-NR5009 103 Specifications (TX-NR3009 105 To reset the AV receiver to its factory
  • Onkyo TX-NR3009 | Owner Manual - Page 6
    D/A Converters • (TX-NR3009) 192 kHz/24-Bit D/A Converters • Powerful and Highly Accurate 32-bit Processing DSP • Jitter Cleaning Circuit Technology • DSD Direct for Super Audio CD Connections • 8 HDMI*9 Inputs (1 on front panel) and 2 Outputs • Onkyo Q for System Control • (TX-NR5009) 7 Digital
  • Onkyo TX-NR3009 | Owner Manual - Page 7
    DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance." *13 Windows and the Windows logo are trademarks of the Microsoft group of companies. *14 VLSC™ is a trademark of Onkyo Corporation. * "Xantech" is a registered trademark of
  • Onkyo TX-NR3009 | Owner Manual - Page 8
    Front & Rear Panels Front Panel B C D EF G (North American models) J K H I L MN O PQR S T U (European and Asian models) [ VWX Y Z " En 8
  • Onkyo TX-NR3009 | Owner Manual - Page 9
    indicators (25) I Front flap Gently push on the lower end of the front panel to open the flap. J PHONES jack (45) K ZONE 2, ZONE 3, and OFF buttons ( channel indicators J Audio input indicators C Z2 (Zone 2) indicator (73) K Bi AMP indicator (16, 51) D A and B speaker indicators (14) L Audyssey
  • Onkyo TX-NR3009 | Owner Manual - Page 10
    based on TX-NR5009. B CDE F GH I J K L MNO P QR B UNIVERSAL PORT jack C IR IN and OUT jacks D DIGITAL IN COAXIAL and OPTICAL jacks E USB port F ETHERNET port G V REMOTE CONTROL jack H RS232 port Terminal for control. I HDMI IN and HDMI output (HDMI OUT MAIN and HDMI OUT SUB
  • Onkyo TX-NR3009 | Owner Manual - Page 11
    Remote Controller Controlling the AV Receiver B C D *1 E F B G H I C J D K*2 L*2 E M N*2 F O To control the AV receiver, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See "Entering Remote
  • Onkyo TX-NR3009 | Owner Manual - Page 12
    Connections Connecting the AV Receiver Connecting Your Speakers Connecting the Speaker Cables ■ 9.2-channel Playback The following illustration shows how to connect the speakers to each pair of terminals. If you're using only one surround back speaker, connect
  • Onkyo TX-NR3009 | Owner Manual - Page 13
    No matter how many speakers you use, 2 powered subwoofers are recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings automatically (➔ page 33) or manually (➔ page 51). Number of 2 3 4 5 6 7 7 7 8 8 9 9 9 10 11 speakers
  • Onkyo TX-NR3009 | Owner Manual - Page 14
    you can configure the AV receiver to suit your exact requirements and application. Two typical applications are shown below. ■ Speakers A: 7.2-channel playback ■ Speakers A: 5.2-channel playback Speakers B: Stereo playback Speakers B: 2.1-channel playback with bi-amped In this example, Speakers
  • Onkyo TX-NR3009 | Owner Manual - Page 15
    B The following illustration shows how to connect the speakers for up to 7.2-channel playback with Speakers A or Speakers B. If you're using only one the surround and surround back speakers. Dipole speakers output the same sound in two directions. Dipole speakers typically have an arrow printed on
  • Onkyo TX-NR3009 | Owner Manual - Page 16
    the speakers' tweeter (high) and woofer (low) terminals. • Bi-amping can be used only with speakers that support biamping. Refer to your speaker manual. Bi-amping provides improved bass and treble performance. When bi-amping is used, the AV receiver is able to drive up to a 7.2 speaker system in the
  • Onkyo TX-NR3009 | Owner Manual - Page 17
    to use a more powerful power amplifier, you can use the AV receiver as a preamp. Connect all speaker outputs to the power amplifier. See the manuals supplied with your amplifier for details. Note *1 Specify "None" for any channel that you don't want to output (➔ page 52). Power amplifier *1 En 17
  • Onkyo TX-NR3009 | Owner Manual - Page 18
    stereo/mono) is 32/44.1/48/88.2/96 kHz. In case of an HDMI connection, 176.4/192 kHz is also available. Note • The AV receiver does not support SCART plugs. • The AV receiver's optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it's removed. Push
  • Onkyo TX-NR3009 | Owner Manual - Page 19
    on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound may be cut off. • As the "Audio TV Out" setting is
  • Onkyo TX-NR3009 | Owner Manual - Page 20
    on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. Front "# video recorder, RI ✔ dock Satellite/cable set-top box, RI dock, etc. ✔ Game console ✔ TV, CD player ✔ Other components ✔ MP3 player
  • Onkyo TX-NR3009 | Owner Manual - Page 21
    /DVD player, RI dock Satellite/cable set-top box, RI dock, etc. Game console TV, projector, etc. Personal computer DVD player, DVD-Audio, Super Audio CDcapable player, MPEG decorder Assignable Note *1 TX-NR5009 only. *2 Do not connect the AV receiver's USB port to a USB port on your computer
  • Onkyo TX-NR3009 | Owner Manual - Page 22
    AV receiver. The other jack is for connecting additional V-capable components. • Connect only Onkyo components to V jacks. Connecting other manufacturer's components may cause a malfunction. • Some components may not support all V functions. Refer to the manuals • The surround sound and DSP listening
  • Onkyo TX-NR3009 | Owner Manual - Page 23
    equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit. • Do not use a power cord other than the one supplied with the AV receiver. The supplied power cord is designed exclusively for use with the AV receiver and should not be used with any other
  • Onkyo TX-NR3009 | Owner Manual - Page 24
    & Basic Operations Turning On/Off the AV Receiver (North American models) ON/STANDBY (European and Asian models) ON/STANDBY RECEIVER RECEIVER POWER Turning On 1 (European and Asian models) Set POWER to the ON position (?) on the front panel. The AV receiver enters standby mode. 2 Press ON
  • Onkyo TX-NR3009 | Owner Manual - Page 25
    via Onkyo Dock" (➔ page 76) • "Controlling Other Components" (➔ page 79) 3 To adjust the volume, use VOL R/X. 4 Select a listening mode and enjoy! See also: • "Using the Listening Modes" (➔ page 36) • "Sound Program Edit" (➔ page 58) • "Audyssey" (➔ page 58) ■ Operating on the AV receiver 1 Use
  • Onkyo TX-NR3009 | Owner Manual - Page 26
    MENU This button returns to top menu of the Internet Radio service. L RETURN This button returns to the previous menu. M that comes with the iPod/iPhone to the USB port on the front of the AV receiver. While reading the contents of your iPod/iPhone, the message "Connecting..." appears on the display
  • Onkyo TX-NR3009 | Owner Manual - Page 27
    Radio You need to connect the AV receiver to your home network (➔ page 100). You can select Internet radio stations by connecting to the AV receiver from your computer and selecting stations in your web browser. Internet radio URLs in the following formats are supported: PLS, M3U, and podcast (RSS
  • Onkyo TX-NR3009 | Owner Manual - Page 28
    Press TOP MENU to go to the top menu of the Internet Radio services. Tip • By pressing SEARCH, you can toggle between the playback screen and IP address to the AV receiver, so if you find that you can't connect to the AV receiver, recheck the AV receiver's IP address on the "Network" screen. 2 Click
  • Onkyo TX-NR3009 | Owner Manual - Page 29
    , the AV receiver may not able to access the content. See the instruction manual of the media server. 5 Use R/X to select an item, and then press ENTER or  to start playback. 1 Start Windows Media Player 11. 2 On the "Library" menu, select "Media Sharing". The "Media Sharing" dialog box appears
  • Onkyo TX-NR3009 | Owner Manual - Page 30
    Libraries" menu on Windows Media Player 12. 5 Select the AV receiver from the right-click menu. The "Play to" window appears and playback good reception. In this case, switch to manual tuning mode and listen to the station in mono. ■ Manual tuning mode In manual tuning mode, FM stations will be in
  • Onkyo TX-NR3009 | Owner Manual - Page 31
    1 through 40. 4 Press MEMORY again to store the station or channel. The station or channel is stored and the preset number stops flashing. Repeat this procedure for to select a preset directly. The AV receiver supports four types of RDS information: PS (Program Service) When tuned to an RDS station
  • Onkyo TX-NR3009 | Owner Manual - Page 32
    later in this chapter. 3 To start the search, press the enter button. The AV receiver searches until it finds a station of the type you specified, at which point music National music Oldies music Folk music Documentary Alarm test Alarm Display None News Affairs Info Sport Educate Drama Culture
  • Onkyo TX-NR3009 | Owner Manual - Page 33
    caused by room acoustics by capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Audyssey MultEQ XT32 can be used with Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (➔ page 59). Before using this
  • Onkyo TX-NR3009 | Owner Manual - Page 34
    Powered Zone 2 Powered Zone 3 AUDYSSEY the AV receiver, the optional unit setting be measured and no sound will be Test tones are played through each speaker as Audyssey MultEQ XT32 Room Correction and Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements
  • Onkyo TX-NR3009 | Owner Manual - Page 35
    setting them manually. Using a Powered Subwoofer If you're using a powered subwoofer and it outputs very low-frequency sound at a low volume level, it may not be detected by Audyssey MultEQ XT32 Room Correction and Speaker Setup. If the "Subwoofer" appears on the "Review Speaker Configuration
  • Onkyo TX-NR3009 | Owner Manual - Page 36
    Dolby Digital and DTS listening modes can only be selected if your Blu-ray Disc/DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, or HDMI). • The listening modes you can select depends on the format of the input signal. To check the format, see "Displaying
  • Onkyo TX-NR3009 | Owner Manual - Page 37
    Source The following audio formats are supported by the listening mode. " 4 % ' ( ) This is mono (monophonic) sound. This is stereo (stereophonic) sound. Two independent audio signal channels are reproduced through two speakers. This is 5.1-channel surround sound. This surround system has five
  • Onkyo TX-NR3009 | Owner Manual - Page 38
    of being right in front of the stage. ( Suitable for rock or pop music, listening to music in this mode creates a ) lively sound field with a powerful acoustic image, like being at a club or rock concert. This mode adds realistic acoustics to TV shows produced in a TV studio, surround effects
  • Onkyo TX-NR3009 | Owner Manual - Page 39
    Listening Mode Description Input Source Dolby Pro Logic IIx*3 Dolby Pro Logic IIx expands any 2-channel source for 7.1-channel Dolby Pro Logic II playback. It provides a very natural and seamless surround-sound experience that fully envelops the listener. As well as music and movies, video
  • Onkyo TX-NR3009 | Owner Manual - Page 40
    the front and surround channels. • Dolby Pro Logic II/IIx*3 Movie + Audyssey DSX P L M o v i e D S X • Dolby Pro Logic II/IIx*3 Music + Audyssey DSX 4 • Dolby Pro Logic II/IIx*3 Game + Audyssey DSX P L M u s i c D S X The combination of Dolby Pro Logic II/IIx*3 and Audyssey DSX modes can be
  • Onkyo TX-NR3009 | Owner Manual - Page 41
    the home-theater environment. They can be used with 2-channel matrixed and multichannel sources. Surround back speaker output depends on on the display. 4 • Dolby Pro Logic IIx Movie + THX Cinema • Dolby Pro Logic IIx Music + THX Music The combination of Dolby Pro Logic IIx and THX Cinema/Music
  • Onkyo TX-NR3009 | Owner Manual - Page 42
    sound. *3 If there are no surround back speakers or Powered Zone 3 is being used, Dolby Pro Logic II is used. *4 For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system. *5 AV receiver can input the DSD signal from HDMI listening level so the user does not have to change
  • Onkyo TX-NR3009 | Owner Manual - Page 43
    ", "Re-EQ(THX)", and "Screen Centered Dialog". See also: • "Audyssey" (➔ page 58) • "Using the Audio Settings" (➔ page 69) channels shown here output the sound. Using the Sleep Timer With the sleep timer, you can set the AV receiver to turn off automatically after a specified period. 1 Press RECEIVER
  • Onkyo TX-NR3009 | Owner Manual - Page 44
    AV receiver's DIMMER. Changing the Input Display When you connect an V-capable Onkyo component The Whole House Mode only supports analog audio. • To use the Whole House Mode, Powered Zone 2/3 must be set to will switch Multi Zone off. • The sound from Powered Zone 2/3 may interrupt when turning the
  • Onkyo TX-NR3009 | Owner Manual - Page 45
    high speakers is output by priority. `Speaker Layout:FW: The sound from front wide speakers is output by priority. Note • This setting cannot be selected when bi-amping the front speakers (➔ page 51) or using Speakers B (➔ page 51) or Powered Zone 2 (➔ page 51). • Playback conditions may be limited
  • Onkyo TX-NR3009 | Owner Manual - Page 46
    Onkyo components via simple commands from a single-button press. These commands are user- box, and the AV receiver are turned on. Then the input selector is set to "CBL/SAT". ■ MY MUSIC The Onkyo CD player and the AV receiver settings. *2 With some televisions, the power may not be turned off (or
  • Onkyo TX-NR3009 | Owner Manual - Page 47
    HDMI 5. Auto Standby 6. Network 7. Firmware Update I Remote Controller Setup (➔ page 79) 3. Audio Adjust 1. Multiplex/Mono 2. Dolby 3. DTS 4. Audyssey DSX 5. Theater-Dimensional 6. LFE Level 7. Direct 8. Sound on the AV receiver by using SETUP, the arrow buttons, and ENTER. • During Audyssey MultEQ®
  • Onkyo TX-NR3009 | Owner Manual - Page 48
    Changing the "Monitor Out" setting manually 1 Press MONITOR OUT on HDMI outputs at the resolution supported by both TVs. 2 Press MONITOR OUT repeatedly to select: `Analog, HDMI Main, HDMI Sub, Both, Both(Main) or Both(Sub) ■ Resolution ` Through*1: Select this to pass video through the AV receiver
  • Onkyo TX-NR3009 | Owner Manual - Page 49
    HDMI2" to the "BD/DVD" input selector. If you've connected your TV to the AV receiver with an HDMI cable, composite video, S-Video and component video sources can be upconverted* and output by the HDMI output*1. You can set this for each input selector by selecting the option. See "Video Connection
  • Onkyo TX-NR3009 | Owner Manual - Page 50
    composite video and S-Video sources from the HDMI output. Note • For composite video and PHONO, PORT (TX-NR5009) `COAXIAL1, COAXIAL2, COAXIAL3, OPTICAL1, OPTICAL2, OPTICAL3: (TX-NR3009) `COAXIAL1, to If you connect a component to the AV receiver's analog multichannel input, you must assign that
  • Onkyo TX-NR3009 | Owner Manual - Page 51
    the "Speakers Type(Front A)" or "Speakers Type(Front B)" setting. For details on speaker wire connection, see "Bi-amping the Front Speakers" (➔ page 16). Note • When bi-amping is used, the AV receiver is able to drive up to 7.2 speakers in the main room. • Before you change these settings, turn
  • Onkyo TX-NR3009 | Owner Manual - Page 52
    a good sized woofer. For smaller speakers, specify a crossover frequency. Sounds below the crossover frequency will be output by the subwoofer instead of the speaker. Refer to your speaker's manuals to determine the optimum crossover frequencies. If you set up your speakers using Audyssey MultEQ
  • Onkyo TX-NR3009 | Owner Manual - Page 53
    the UNIVERSAL PORT jack on the AV receiver, you can select if you Audyssey MultEQ® XT32 Room Correction and Speaker Setup function (➔ page 33). For Speakers B, you need to change the settings manually. Here you can specify the distance from each speaker to the listening position so that the sound
  • Onkyo TX-NR3009 | Owner Manual - Page 54
    the AV receiver is muted. • Speakers that you set to "No" or "None" in the "Speaker Configuration" cannot be selected (➔ page 52). • The test tone frequencies (e.g., 63Hz) affect bass sounds; high frequencies (e.g., 16000Hz) affect treble sounds. 3 Use R to select "Channel", and then use F/S to
  • Onkyo TX-NR3009 | Owner Manual - Page 55
    ™ Certified receivers. With sound elements can be lost or perceived differently by the listener. THX Loudness Plus compensates for the tonal and spatial shifts that occur when the volume is reduced by intelligently adjusting ambient surround channel levels and frequency response. This enables users
  • Onkyo TX-NR3009 | Owner Manual - Page 56
    of the center channel sound. ■ PL IIz Height Gain ` Low ` Mid ` High The Height Gain Control in Dolby Pro Logic IIz Manual". ■ Dolby Volume ` Off ` On Dolby Volume automatically adjusts the difference in volume levels which can occur between different contents or source components, freeing the user
  • Onkyo TX-NR3009 | Owner Manual - Page 57
    can specify by how much the front left and right channel output is attenuated in order to create the center channel. Changing the value from "0" to "5" will spread the sound of the center channel to left and right (outwards). Audyssey DSX™ ■ Soundstage ` -3dB to Reference to +3dB With this setting
  • Onkyo TX-NR3009 | Owner Manual - Page 58
    not to use the subwoofer with the sound program. ■ Music Optimizer*1 `Off, On See "Music Optimizer" (➔ page 70). ■ Equalizer*1 ` Off ` Manual: The manual setting in "Equalizer Settings" (➔ page 54) is applied. ■ Audyssey*1 `Off, Movie, Music See "Audyssey". ■ Dynamic EQ*1*2 `Off, On See "Dynamic EQ
  • Onkyo TX-NR3009 | Owner Manual - Page 59
    Off". About Audyssey Dynamic EQ® Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Dynamic EQ selects the correct frequency response and surround levels moment-by-moment at any user-selected volume
  • Onkyo TX-NR3009 | Owner Manual - Page 60
    on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the . The range of values you can adjust will depend on whether your TV or display supports HDMI Lip Sync and if the "Lip Sync" setting is set to "On" or not
  • Onkyo TX-NR3009 | Owner Manual - Page 61
    setting, the AV receiver automatically selects the "4:3", "Full", "Zoom" or "Wide Zoom" mode. See "Monitor Out" for details on the monitor output setting (➔ page 48). ■ Picture Mode*1 ` Custom: All settings can be performed manually HDMI receiver. Accordingly, Onkyo
  • Onkyo TX-NR3009 | Owner Manual - Page 62
    be an issue with overly 4K Upscaling: Select this for an output resolution four times that of 1080p, resulting in 3840 × 2160 pixels. You can specify the output resolution for the HDMI Output(s) and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported
  • Onkyo TX-NR3009 | Owner Manual - Page 63
    When "Resolution" is set to "1080/24" or "4K Upscaling" while "Monitor Out" is set to "HDMI Sub" or "Both(Sub)", the video is output in AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually
  • Onkyo TX-NR3009 | Owner Manual - Page 64
    supported. • When the "Charge Mode" setting is set to "On", or to "Auto" with your iPod/iPhone recharging, the SLEEP indicator is dimly lit in standby mode. In such conditions, the power consumption of the AV receiver selector are specific to analog sound. • used when 2-channel (2/0) stereo via HDMI).
  • Onkyo TX-NR3009 | Owner Manual - Page 65
    When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from the AV receiver is turned on. To use the same volume level as when the AV receiver was last turned off, select "Last". The "Zone 2 Power On Volume" and "Zone 3 Power
  • Onkyo TX-NR3009 | Owner Manual - Page 66
    the connected component's instruction manual for details. • When "HDMI Control(RIHD)" setting is set to "On", the power consumption on standby mode slightly increases. (Depending on the TV status, the AV receiver will enter standby mode as usual.) • The Q control does not support HDMI OUT SUB. Use
  • Onkyo TX-NR3009 | Owner Manual - Page 67
    settings of the "HDMI Control(RIHD)", "HDMI Through" or "Audio Return Channel" turn off the power on all connected pieces of equipment and then turn them on again. Refer to the user's manuals for all connected pieces of equipment. This setting determines whether or not the AV receiver uses DHCP to
  • Onkyo TX-NR3009 | Owner Manual - Page 68
    AV receiver's firmware. Do not shutdown the power of the AV receiver while updating. ■ Universal Port `via NET: Performs the firmware update via Internet. Check the network connection before updating. `via USB: Performs the firmware update from a USB device. These settings allow you to update Onkyo
  • Onkyo TX-NR3009 | Owner Manual - Page 69
    66). - "HDMI Control(RIHD)" is set to "On" (➔ page 66) and you're listening through your TV speakers. Sound Program ■ Sound Program ` Stereo Source the Direct, Pure Audio or THX listening mode is selected. Operating on the AV receiver 1 Press TONE repeatedly to select either "Bass" or "Treble" for
  • Onkyo TX-NR3009 | Owner Manual - Page 70
    to "Off". • When "Sound Program" is enabled, the setting must be made with the "Sound Program Edit". Audyssey ■ Audyssey See "Audyssey" in "Source Setup" (➔ Dolby TrueHD. • The Late Night function is set to "Off" when the AV receiver is set to standby. For Dolby TrueHD sources, it will be set to "
  • Onkyo TX-NR3009 | Owner Manual - Page 71
    -HD Master Audio, DTS Express, DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby PLIIx Movie, DTS Neo:X Cinema. the setting will return to "On" when the AV receiver is turned off. • These settings cannot be used Dialog" can be used when supported listening mode is selected. • This setting cannot be
  • Onkyo TX-NR3009 | Owner Manual - Page 72
    in your main listening room and 2-channel stereo playback in Zone 2/3. Main room TV AV receiver TV AV receiver Zone 2 R Main room TV AV receiver Zone 3 R En 72 Zone 2 IN R L Receiver/ L integrated amp Zone 3 IN R L Receiver/ integrated amp Note • With the default settings, the
  • Onkyo TX-NR3009 | Owner Manual - Page 73
    mA for Zone 3). Connecting this jack to a 12-volt trigger input on a component in Zone 2/3 will make that component turn on or off as the AV receiver turns on or off the Zone 2/3. ZONE 3 ZONE 2 OFF 1 To turn on Zone 2/3 and select an input source, press ZONE 2 or ZONE 3 followed by an
  • Onkyo TX-NR3009 | Owner Manual - Page 74
    speakers are connected to a receiver or integrated amp in Zone 2/3, use its terminals. Digital input sources are not output. If no sound is heard when an input source is selected, verify selected, the power consumption of standby mode slightly increases. • When setting the AV receiver to standby
  • Onkyo TX-NR3009 | Owner Manual - Page 75
    the other component via the IR emitter. Signals picked up by the AV receiver's remote control sensor are not output. IR IN IR OUT Connecting block AV receiver IR Emitter IR receiver Remote controller Other component AV receiver Signal flow Signal flow The IR emitter should be connected to the
  • Onkyo TX-NR3009 | Owner Manual - Page 76
    supported iPod/iPhone models, see the instruction manual of the Onkyo Dock. UP-A1 Dock With the UP-A1 Dock, you can easily play the music, photos, or movies stored on your Apple iPod/iPhone through the AV receiver and enjoy great sound. You can use the AV receiver • The Auto Power On function will
  • Onkyo TX-NR3009 | Owner Manual - Page 77
    Not Support The AV receiver do not support the connected dock. • PORT UP-A1 UP-A1 Dock is connected. Note • The AV receiver displays the message "UP-A1" for several seconds after recognizing the UP-A1. Note • Linked operations do not work with video playback or when the alarm is set to play a sound
  • Onkyo TX-NR3009 | Owner Manual - Page 78
    as expected. • For detailed operation of iPod/iPhone, please refer to the instruction manual of the RI Dock. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Also, your iPod/iPhone on-screen navigation menus only appear on a TV that is connected to the HDMI OUT MAIN. En 78
  • Onkyo TX-NR3009 | Owner Manual - Page 79
    indicated pages. BD/DVD Onkyo Blu-ray Disc player (➔ page 81) TV/CD Onkyo CD player (➔ page 81) PORT Onkyo Universal Port Option (➔ "Search DB", and then press ENTER to access the database on the network. The AV receiver accesses and searches the database. After searching, a list of the brand
  • Onkyo TX-NR3009 | Owner Manual - Page 80
    code and the total number of codes for the brand. 13 If you can control component, press RECEIVER, use R/X to select "Works", and then press ENTER. If you cannot control component, press RECEIVER, use R/X to select "Doesn't work (Retry)" and press ENTER. The next code appears. Repeat from step 11
  • Onkyo TX-NR3009 | Owner Manual - Page 81
    a TV TV is preprogrammed with the remote control code for controlling a TV that supports the Q*1 (limited to some models). The TV must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. If controlling your TV via Q doesn't work very well, program your TV
  • Onkyo TX-NR3009 | Owner Manual - Page 82
    receiver CD player/CD recorder MD recorder Cassette tape deck J B Buttons B SOURCE*1 ✔ C , INPUT, ✔ TV VOL R/X D GUIDE ✔ K TOP MENU ✔ ✔✔ L E Q function is not supported. The Q supported by the AV receiver is the CEC system control function of the HDMI standard. *3  (
  • Onkyo TX-NR3009 | Owner Manual - Page 83
    AV receiver Stop, and Pause are preprogrammed with commands for controlling Onkyo CD players, cassette decks, and DVD players. However can restore the preprogrammed commands at any time by resetting the remote controller (➔ page 81). • To -CH VIDEO-1 CD SLEEP DVD POWER Within about 4 inches (10
  • Onkyo TX-NR3009 | Owner Manual - Page 84
    , or MY MUSIC. The commands in the macro are transmitted in the order in which they were programmed. Keep the remote controller pointed at the AV receiver until all of the commands have been transmitted. Macros can be run at any time, regardless of the current remote controller mode. Deleting Macros
  • Onkyo TX-NR3009 | Owner Manual - Page 85
    Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can't resolve the issue yourself, contact your Onkyo dealer. If you can't resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer. To reset the AV
  • Onkyo TX-NR3009 | Owner Manual - Page 86
    you use the pause, fast forward, or fast reverse function on your player. If you switch your player from DTS to PCM, because the AV receiver does not switch formats immediately, you may not hear any sound, in which case you should stop your player for about three seconds, and then resume playback.
  • Onkyo TX-NR3009 | Owner Manual - Page 87
    . When the resolution is set to any resolution not 48 supported by the TV, no video is output from the HDMI outputs. If the message "Resolution Error" appears on the - AV receiver's display, this indicates that your TV does not support the current video resolution and you need to select another
  • Onkyo TX-NR3009 | Owner Manual - Page 88
    instructions. UP-A1 Dock for iPod/iPhone ■ There's no sound Make sure your iPod/iPhone is actually playing. - Make sure your iPod/iPhone is properly inserted in - the Dock. Make sure the UP-A1 Dock is connected to the - UNIVERSAL PORT jack on the AV receiver. Make sure the AV receiver
  • Onkyo TX-NR3009 | Owner Manual - Page 89
    " is set to "Enable" in the "Network" setting. - "HDMI Control(RIHD)" setting is set to "On". (Depending on the TV status, the AV receiver will enter standby mode as usual.) - The "HDMI Through" setting is set to other than "Off". ■ The sound changes when I connect my headphones When a pair
  • Onkyo TX-NR3009 | Owner Manual - Page 90
    on your TV/monitor connected to the HDMI output(s) is unstable, try switching the power cord from the wall outlet, wait at least five seconds, and then plug it back in. Important Note Regarding Video Playback The AV receiver to "Direct" (➔ page 61). Onkyo is not responsible for damages (such
  • Onkyo TX-NR3009 | Owner Manual - Page 91
    of data, or for any other reason whatsoever. See the Onkyo web site for latest information. Updating the Firmware via Network The AV receiver allows you to update the firmware using network connection on the rear panel. Note • Make sure your AV receiver and TV are turned on and an Ethernet cable is
  • Onkyo TX-NR3009 | Owner Manual - Page 92
    an Internet connection, please contact 92 Onkyo Support (➔ page 93). Updating the Firmware via USB The AV receiver allows you to update the firmware using a USB device. Note • Never unplug or turn off the AV receiver during the update process. • Never plug or unplug an HDMI cable or a USB device
  • Onkyo TX-NR3009 | Owner Manual - Page 93
    turn on again. Congratulations! You now have the latest firmware installed on your Onkyo AV receiver. Troubleshooting Case 1: If "No Update" is displayed on the front display of the AV receiver, it means that the firmware has already been updated. You do not need to do anything further. Case
  • Onkyo TX-NR3009 | Owner Manual - Page 94
    supported by your components. Use the following sections as a guide. The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV receiver or HDMI, the latter offering the best picture quality. The AV receiver can
  • Onkyo TX-NR3009 | Owner Manual - Page 95
    Blu-ray Disc/DVD player, etc. Analog Multichannel Optical Coaxial HDMI *1 AV receiver *3 Analog IN *1*3 *1 *1 OUT HDMI *1 *2 TV, projector, etc. *1 Depends on the "Audio TV Out" setting (➔ page 66). *2 This is possible when "Audio Return Channel" is set to "Auto" (➔ page 67), the TV/CD
  • Onkyo TX-NR3009 | Owner Manual - Page 96
    video signals at different resolutions are output by the AV receiver. NTSC/PAL ✔: Output Input Output HDMI 4K*2 1080p/24 1080p 1080i 720p 480p/576p 480i/576i HDMI 1080p ✔ ✔ ✔ 1080i ✔ ✔ ✔ ✔ ✔ 720p ✔ ✔ ✔ ✔ ✔ 480p/576p ✔ ✔ ✔ ✔ ✔ ✔ 480i/576i ✔ ✔ ✔ ✔ ✔ ✔ ✔ Component
  • Onkyo TX-NR3009 | Owner Manual - Page 97
    • Sharp TV ■ Players/Recorders • Onkyo and Integra Q-compatible players • Toshiba boxes: up to four. • Do not connect the AV receiver to the other AV receiver/AV amplifier via HDMI. by connecting the AV receiver to an Q-compatible TV. • The AV receiver will enter standby mode when the power of the TV
  • Onkyo TX-NR3009 | Owner Manual - Page 98
    on, and selects the input to which the AV receiver is connected. 5. Following the operating instructions of the TV, select "Use the TV speakers the HDMI jack to which the AV receiver is connected, the input on the AV receiver will be switched to "TV/CD". • The AV receiver will automatically power on
  • Onkyo TX-NR3009 | Owner Manual - Page 99
    PC are not supported. • The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there's no sound from a component connected via HDMI, check its setup. Refer to the connected component's instruction manual for details. En
  • Onkyo TX-NR3009 | Owner Manual - Page 100
    Consult your ISP if you have any problems with your Internet connection. • The AV receiver uses DHCP to configure its network settings automatically. If you want to configure these settings manually, see "Network" (➔ page 67). • The AV receiver does not support PPPoE settings, so if you have a PPPoE
  • Onkyo TX-NR3009 | Owner Manual - Page 101
    without the need for special drivers or software. Note that not all USB MP3 players support the USB Mass Storage Class standard. Refer to your USB MP3 player's instruction manual for details. • Protected WMA music files on an MP3 player cannot be played. • Onkyo accepts no responsibility whatsoever
  • Onkyo TX-NR3009 | Owner Manual - Page 102
    AV receiver supports the following music file formats. Variable bit-rate (VBR) files are supported. However, playback time may not be display correctly. Note • With remote playback, the AV receiver does not support or .WMA) WMA stands for Windows Media Audio and is an audio compression technology developed by Microsoft
  • Onkyo TX-NR3009 | Owner Manual - Page 103
    Specifications (TX-NR5009) Amplifier Section Tuner Section Rated Output Power All channels: (North American) 145 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.05% (FTC) 175 watts minimum continuous
  • Onkyo TX-NR3009 | Owner Manual - Page 104
    /Z3R) + Front Wide/ZONE2 (L, R) + Front High (L, R) Phones 1 (6.3 ø) ■ Others Setup Mic RS232 Universal Port RI USB Ethernet IR Input IR Output 12 V Trigger Out 1 1 1 1 1 (Front)/1 (Rear) 1 1 1 2 Specifications and features are subject to change without notice. En 104
  • Onkyo TX-NR3009 | Owner Manual - Page 105
    Specifications (TX-NR3009) Amplifier Section Tuner Section Rated Output Power All channels: (North American) 140 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.05% (FTC) 160 watts minimum continuous
  • Onkyo TX-NR3009 | Owner Manual - Page 106
    /Z3R) + Front Wide/ZONE2 (L, R) + Front High (L, R) Phones 1 (6.3 ø) ■ Others Setup Mic RS232 Universal Port RI USB Ethernet IR Input IR Output 12 V Trigger Out 1 1 1 1 1 (Front)/1 (Rear) 1 1 1 2 Specifications and features are subject to change without notice. En 106
  • Onkyo TX-NR3009 | Owner Manual - Page 107
    Memo En 107
  • Onkyo TX-NR3009 | Owner Manual - Page 108
    onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo .com/ Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo -9039 http://www.ch.onkyo.com/ 1301, 555 Tower
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
AV Receiver
TX-NR5009
TX-NR3009
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction
.......................................
2
Connections
....................................
12
Turning On & Basic Operations
....
24
Advanced Operations
.....................
47
Controlling Other Components
......
76
Appendix
.........................................
85
E
n