Onkyo TX-NR3009 Owner Manual - Page 95
Audio Connection Formats, Use this setting if you connect the AV receiver's, to your TV., Resolution
View all Onkyo TX-NR3009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
■ "Monitor Out" set to "Analog" Video input signals flow through the AV receiver as shown, with composite video, S-Video, and PC IN (Analog RGB) sources being upconverted for the component video output. Use this setting if you connect the AV receiver's COMPONENT VIDEO MONITOR OUT to your TV. Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs. The composite video, S-Video and component video outputs pass through their respective input signals as they are. This signal flow also applies when the "Resolution" setting is set to "Through" (➔ page 48). Video Signal Flow Chart Blu-ray Disc/DVD player, etc. Composite S-Video PC IN Component HDMI (Analog RGB) IN AV receiver Composite MONITOR OUT S-Video Component HDMI *1 TV, projector, etc *1 For details, refer to "Video Resolution Chart" (➔ page 96). Video Signal Flow and the Resolution Setting When the "Monitor Out" setting is set to "Analog" (➔ page 48), if the "Resolution" setting is set to anything other than "Through" (➔ page 48), the video signal flow will be as shown here, with composite video, S-Video, and PC IN (Analog RGB) sources being upconverted for the component video output. The composite video, S-Video, and component video outputs pass through their respective analog input signals as they are. HDMI input signals are not output. Video Signal Flow Chart Blu-ray Disc/DVD player, etc. Composite S-Video PC IN Component HDMI (Analog RGB) IN AV receiver MONITOR OUT Composite S-Video Component HDMI TV, projector, etc Audio Connection Formats Audio components can be connected by using any of the following audio connection formats: analog, analog multichannel, optical, coaxial or HDMI. When choosing a connection format, bear in mind that the AV receiver does not convert digital input signals for analog line outputs and vice versa. For example, audio signals connected to an optical or coaxial digital input are not output by the analog VCR/DVR OUT. If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: HDMI, digital, analog. Audio Signal Flow Chart Blu-ray Disc/DVD player, etc. Analog Multichannel Optical Coaxial HDMI *1 AV receiver *3 Analog IN *1*3 *1 *1 OUT HDMI *1 *2 TV, projector, etc. *1 Depends on the "Audio TV Out" setting (➔ page 66). *2 This is possible when "Audio Return Channel" is set to "Auto" (➔ page 67), the TV/CD input selector is selected, and your TV is ARC capable. *3 Only the front L/R channels are output. En 95