Onkyo TX SR804 Instruction Manual - Page 68
Dolby Digital Settings, LFE Level Setting, Mono/Multiplex Settings, Manual
View all Onkyo TX SR804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Adjusting the Listening Modes-Continued Dolby Digital Settings ■ Dolby EX This setting determines how Dolby Digital EX signals are handled. This setting is unavailable if no surround back speakers are connected or the ZONE 2 SPEAKERS terminals are being used (page 82). Auto: Dolby Digital EX can be selected from among the Dolby listening modes, and THX Surround EX can be selected from among the THX listening modes. Manual: You can select listening modes in accordance with the table on page 61. ■ Late Night With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels-ideal for watching movies late at night when you don't want to disturb anyone. Off: Late Night function off. Low: Small reduction in dynamic range. High: Big reduction in dynamic range. Setting Late Night with the Remote Controller: The remote controller can be used to set the Late Night function only when the input source is Dolby Digital. RECEIVER L NIGHT Press the [RECEIVER] REMOTE MODE button, and then press the [L NIGHT] button repeatedly to select: Off, Low, or High. Mono/Multiplex Settings Mono ■ Input Ch This setting determines which channel is output when the Mono listening mode is used with a stereo source. Auto L+R: Both the left and right channels are output (default). Left: Only the left channel is output. Right: Only the right channel is output. ■ Output Sp This setting determines which speakers output mono audio when the Mono listening mode is selected. Front: Mono audio is output from the front left and right speakers. Center: Mono audio is output from the center speaker (default). Multiplex ■ Multiplex This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output (default). Sub: The sub channel is output. Main/Sub: Both the main and sub channels are output. Notes: • The effect of the Late Night function depends on the Dolby Digital material that you are playing, and with some material there will be little or no effect. • The Late Night function is set to Off when the AV receiver is set to Standby. LFE Level Setting With this setting, you can set the level of the LFE (Low Frequency Effects) channel for Dolby Digital, DTS, MCH PCM (HDMI IN), and MCH Ana (multichannel DVD input). The level can be set to -∞, -20 dB, -10 dB, or 0 dB (default). If you find that the low-frequency effects are too loud when using one of these sources, set the level to -20 dB or -∞ dB. 68