Panasonic AG-HMC40 User Manual - Page 110

Setup menu list (continued) OTHER FUNCTIONS screen (continued) Item POWER SAVE Display mode CAMERA PHOTO QUICK POWER CAMERA ON PHOTO HDMI OUT SEL CAMERA PHOTO PB CMPNT OUT SEL CAMERA PHOTO PB DOWNCON MODE CAMERA PB*1 VIDEO SETUP CAMERA PB*1 AUDIO OUT CAMERA PB*1 *1 Only during clip playback Description of settings Selects the power-saving mode when the camera is not operated for about 5 minutes while an SD Memory Card is inserted in CAMERA mode. ON: The camera-recorder's power is set to OFF. OFF: The camera-recorder's power is not set to OFF. • Even when this setting is ON, the power will not turn OFF when an SD Memory Card is not inserted, when the camera is in PB mode, or when the AC adapter is connected. • Designated operations include button and ring operations, opening/closing/ touching of the LCD monitor, and remote control operations (when IR REMOTE is set to ON). Sets Quick Power On mode to ON or OFF. When Quick Power On mode is enabled, the camera will enter recording standby mode in CAMERA mode about 1.9 seconds after power is turned ON. ON OFF • Startup time will not decrease even if an SD Memory Card is not inserted. • The zoom ratio will be set to approximately x 1 wide end (Z00). Sets the output video format of the HDMI OUT terminal. AUTO: Automatically determines the output resolution based on information of connected monitors. 1080i/720P: Fix the output at the recorded resolution. (Output in 1080 interlaced or 720 progressive mode) 480P: Output in 480 progressive mode. • Simultaneous output from HDMI OUT, COMPONENT OUT, and A/V OUT is not possible. The order of priority is HDMI > COMPONENT > A/V. Selects the type of component terminal. AUTO: Monitor with D4 terminal (720P/1080i output) 1080i: Monitor with D3 terminal (1080i output) 480i: Monitor with D1 terminal (480i output) • Cross-conversion is only performed when content recorded at 720P is output at 1080i. Cross-conversion does not take place in other cases. Switches down-conversion output mode. SIDE CROP: Crops the left and right edges. • Images may extend beyond the boundaries of the screen and be partially unable to be seen when outputting from the AV/OUT terminal, or when outputting from the COMPONENT OUT terminal when the COMPNT OUT SEL item is set to 480i. LETTER BOX: Adds black bars to the top and bottom edges. SQUEEZE: Squeezes images horizontally from the left and right. Sets the setup level of video signals. 0%: AV/OUT terminal output and recording setup levels will both be set to 0%. 7.5% A: AV/OUT terminal output setup level will be set to 7.5%, while recording setup level will be set to 0%. Sets the audio signals output from the A/V OUT terminal. CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals CH1: CH1 terminal = CH1 signals, CH2 terminal = CH1 signals CH2: CH1 terminal = CH2 signals, CH2 terminal = CH2 signals • When an SD Memory Card containing 5.1 channel content, recorded on other equipment, is played back on the camera, it is down-mixed to 2 channels when output through the AV/OUT or headphone terminal. indicates the factory setting. 110