Panasonic AG-HMC40 User Manual - Page 91
Main warning displays
UPC - 791871304891
View all Panasonic AG-HMC40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Main warning displays The main warning displays appearing on the LCD monitor or viewfinder are listed below. If a warning display is not listed, check carefully the message displayed. ■A ALL DATA WILL BE DELETED. FORMAT THE CARD NOW? Do you wish to format the SD Memory Card now? Yes/No ■C CANNOT BE USED DUE TO INCOMPATIBLE DATA. No use is possible because the standard for the data is different. CANNOT DELETE WITH THIS BUTTON Clip cannot be deleted. CANNOT DELETE. Clip cannot be deleted. CANNOT PLAY WITH THIS BUTTON No playback is possible. CANNOT PLAY. No playback is possible. CANNOT RECORD PH MODE AND HA MODE INTO THIS CARD. This card cannot be recorded to in PH mode or HA mode. CANNOT SET PRE-REC, CARD CAPACITY TOO LOW. PRE-REC cannot be set as the remaining card capacity is low. CANNOT SET THE NUMBER OF INDEXES HAS EXCEEDED THE MAXIMUM LIMIT. No further indexes can be set because the number of indexes will exceed the maximum limit. CARD DOOR OPENED. Close the card door. CARD ERROR. PLEASE REFORMAT. Formatting has failed. The card needs to be reformatted. CARD FULL. The card is full. CARD LOCKED. Unlock the card. CHECK CARD. Please check the card. CONTROL DATA ERROR HAS BEEN DETECTED. An error has been detected in the control information. ■D DISCONNECT USB CABLE. The camera cannot be operated while connected via USB cable. DISCONNECT USB CABLE. When switching from one mode to another, disconnect the USB connection cable. ■I INCOMPATIBLE CARD. PLEASE CHECK CARD. Recording may not be successful with this card. Please check the card. ■N NO CARD No card is inserted. NOW ACCESSING. PLEASE DO NOT REMOVE CARD. Card is currently being accessed. Please do not remove the card. Displays (Continued on the next page) 91