Panasonic AW-HN38H AW-HN38H Operating Instructions - Page 47
Others 2/4 screen
View all Panasonic AW-HN38H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Camera menu items (continued) ■■Others 2/4 screen ### Others 2/4 ### Zoom Mode Max Digital Zoom Image Stabilizer Tally IR Control IR ID D.Zoom ×16 Off Enable Enable CAM1 Return Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom, D.Extender] Configure the maximum zoom magnification. Opt.Zoom: Use only the optical zoom. Up to 30x*1 optical zoom is possible. *1: This is the zoom magnification for the AW‑HN40. The corresponding magnification for the AW‑HN38 is 22x. i.Zoom: Enable the i.Zoom function. Enabling this function allows you to perform electronic zoom while reducing drops in picture quality. Combining optical zoom and electronic zoom, up to 40x*2 zoom is possible. *2: This is the zoom magnification for the AW‑HN40. The corresponding magnification for the AW‑HN38 is 30x. D.Zoom: Enable the digital zoom function. Picture quality degrades as zoom increases with digital zoom. D.Extender: Enable the digital extender function. When this function is enabled, you can perform optical zoom while maintaining a fixed digital zoom magnification. Smooth zooming operations will be possible at the cost of slight degradation in the image quality. Max Digital Zoom [x2 to x16] Set the maximum digital zoom magnification. This is only enabled when Zoom Mode is set to "D.Zoom". Image Stabilizer [Off, On] Turn the digital image stabilization function off/on. Notes ●● The field of view will be narrower when the image stabilization function is active. ●● When "On" is selected, video will be delayed by 1 frame. ●● When switching between "On" and "Off", the image may go black and the audio may be muted temporarily. ●● Image stabilization cannot be performed while Frame Mix is active. ●● The effect of the image stabilization function is reduced in low-light environments. ●● The unit's image stabilizer function detects movement from the image signal and performs correction. Depending on the shooting conditions, the function may not be able to differentiate between movement of the subject and movement of the unit, resulting in correction errors. Tally [Disable, Enable] "Enable" or "Disable" is set here for the function which turns on or turns off the tally lamp using the tally control signal. 47