Panasonic AW-HN38H AW-HN38H Operating Instructions - Page 88
User management screen [User mng.]
View all Panasonic AW-HN38H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Web screen configurations (continued) User management screen [User mng.] The users and personal computers (IP addresses) that can access the unit from personal computers and mobile terminals are registered in the User mng. screen [User mng.]. User authentication screen [User auth.] Click the [User auth.] tab of User mng. screen [User mng.]. Configure the user authorization settings for the personal computers and mobile terminals that can access the unit. User auth. User authorization is set to "Off" or "On" here. Enter the setting using the [Set] button. Factory settings: Off Authentication Specify the method of user authentication to use. Setting value: Basic Use basic authentication. Digest Use digest authentication. Factory settings: Basic Notes ●● If you change the Authentication setting, close the browser and perform access again. ●● When [User auth.] is set to [On], network connection with the AW‑RP50 will be disabled. ●● When [User auth.] is set to [On] while [Authentication] is set to [Digest], network connection with the AW‑RP50, AW‑RP120, and AK‑HRP200 will be disabled. User name [1 to 32 half-size characters] The user name is input here. Enter the setting using the [Set] button. ●● For details of usable characters, refer to page 66. Password Retype password [4 to 32 half-size characters] The password is input here. Enter the setting using the [Set] button. Access level Select one of the following settings as the user access level. Enter the setting using the [Set] button. Setting value: 1. Administrator This access level allows the user to perform all the unit's operations. 2. Camera control This access level allows only Live screen operations to be performed. Factory settings: 2. Camera control User check A pull‑down menu can be opened here, and the registered users checked. A registered user is indicated in the form of "Registered user name [Access level]". (Example: admin[1]) To delete a registered user, select the user to be deleted, and click the [Delete] button on the right. Up to 9 users can be registered as users. 88