Panasonic AW-HN38H AW-HN38H Operating Instructions - Page 84
Others, Install Position, Preset Speed Table, Preset Speed, Preset Scope, Freeze During Preset,
View all Panasonic AW-HN38H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Web screen configurations (continued) zzOthers This item's setting is reflected when the [Set] button is pressed. Install Position "Desktop" or "Hanging" is selected here as the method used to install the unit. Setting value: Desktop Stand-alone installation Hanging Suspended installation Factory settings: Desktop ●● When "Hanging" has been selected, the top, bottom, left and right of the images will be reversed, and up/down/left/right control for panning and tilting will also be reversed. Preset Speed Table Set the preset speed table (Slow, Fast). During preset playback, preset actions are performed at Preset Speed (1 to 30) values that are based on the table set here. Setting value: Slow Set the preset speed table to "Slow". Fast Set the preset speed table to "Fast". Factory settings: Fast Preset Speed There are 30 preset pan-tilt operation speeds when regenerating the camera direction and other information which are registered in the preset memory. Setting range: 1 to 30 Factory settings: 10 Note ●● If a high value is selected for the Preset Speed setting, the image on the screen may shake when operation stops. Preset Scope Selected here are the setting items to be recalled when the contents of the preset memory are regenerated. Setting value: Mode A Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain, White-BAL Mode B Pan, Tilt, Zoom (including digital zoom), Focus, Iris Mode C Pan, Tilt, Zoom (including digital zoom), Focus Factory settings: Mode A Freeze During Preset Turn the function for freezing images during preset playback off/on. When this is set to "On", preset playback is performed with a still of the image immediately preceding the start of preset playback being output. The image freeze is released when preset playback is finished. Factory settings: Off Notes ●● When this is set to "On", the start of preset operations may be delayed momentarily due to the image being frozen. ●● When HDR is set to "Low" or "High", this is set to "Off". Zoom Mode Configure the maximum zoom magnification. Setting value: Opt.Zoom Use only the optical zoom. Up to 30x*1 optical zoom is possible. *1: This is the zoom magnification for the AW‑HN40. The corresponding magnification for the AW‑HN38 is 22x. i.Zoom Enable the i.Zoom function. Enabling this function allows you to perform electronic zoom while reducing drops in picture quality. Combining optical zoom and electronic zoom, up to 40x*2 zoom is possible. *2: This is the zoom magnification for the AW‑HN40. The corresponding magnification for the AW‑HN38 is 30x. D.Zoom Enable the digital zoom function. Picture quality degrades as zoom increases with digital zoom. D.Extender Enable the digital extender function. When this function is enabled, you can perform optical zoom while maintaining a fixed digital zoom magnification. Smooth zooming operations will be possible at the cost of slight degradation in the image quality. Factory settings: i.Zoom Max Digital Zoom Set the maximum digital zoom magnification. This is only enabled when Zoom Mode is set to "D.Zoom". Setting range: x2 to x16 Factory settings: x16 84