Panasonic AW-HN38H AW-HN38H Operating Instructions - Page 76
Shutter Mode, Frame Mix, Auto F.Mix Max Gain, AGC Max Gain, Day/Night, Night-Day Level, Setting value
View all Panasonic AW-HN38H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Web screen configurations (continued) Shutter Mode Select for camera shutter mode. This item can be set when "Manual" has been selected as the "Contrast Mode" setting. When a higher shutter speed is selected, fast-moving subjects do not become blurred easily but the images will be darker. Setting value: Off The shutter is set to OFF (so that it cannot be tripped). Step The step shutter is set (the steps can be changed). Synchro The synchro shutter is set (the setting can be changed continuously). Factory settings: Off The shutter speeds that can be set are listed below. [When 59.94 Hz has been set as the unit's frequency] When "Step" is selected as the When "Synchro" is selected as "Shutter Mode" the "Shutter Mode" 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 59.94 Hz to max. 660.09 Hz (255 steps) Factory settings: 1/100 [When 50 Hz has been set as the unit's frequency] When "Step" is selected as the When "Synchro" is selected as "Shutter Mode" the "Shutter Mode" 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 50.00 Hz to max. 570.12 Hz (255 steps) Factory settings: 1/120 Frame Mix Select for frame addition (gain-up using sensor storage) amount. This item can be set when "Off" is selected as the "Shutter Mode" item setting. When frame addition is performed, it will appear as if the images are missing some frames. Setting value: Auto, Off, 6dB, 12dB, 18dB, 24dB Factory settings: Auto Auto F.Mix Max Gain When "Auto" for the "Contrast Mode" or "Auto" for the "Frame Mix" is selected, the maximum frame addition amount can be set. If frame addition is performed at the Auto setting, it will appear as if the images are missing some frames. Setting value: 0dB, 6dB, 12dB, 18dB Factory settings: 0dB zzGain The image gain is adjusted here. In locations which are too dark, adjust the gain upward; conversely, in locations which are too bright, adjust it downward. When "Auto" is set, the light quantity is adjusted automatically. The noise increases when the gain is increased. Setting value: A uto, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, 21dB, 24dB, 27dB, 30dB, 33dB, 36dB, 39dB, 42dB, 45dB, 48dB Factory settings: Auto AGC Max Gain When "Auto" is selected as the "Gain" setting, the maximum gain-up amount can be set. Setting value: 6 dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB Factory settings: 24dB Day/Night This is used to select normal shooting or low light shooting (by exposing the subjects to infrared rays). For details, see "Contrast 2/2 screen" (page 38). Setting value: Day, Night, Auto Factory settings: Day Night-Day Level Adjust the level used while switching from Night mode to Day mode when Day/Night is set to "Auto". ●● This can only be configured when Day/Night is set to "Auto". Setting value: Low, Mid, High Factory settings: Mid 76