Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 16
when the mount bracket is going to be used, continued, How to secure the AC, adaptor cable
View all Panasonic AW-HN40H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Stand-alone installation (when the mount bracket is going to be used) (continued) 5 Check the mounting. 6 Connect the rear panel connectors. ●●How to secure the AC adaptor cable A L oosely secure the cable clamp. Cable clamp Loosely secure the cable clamp in the area shown above. B Fasten the cable clamp. LAN cable (for RS-422) HDMI cable AC adaptor LAN cable cable RS-232C cable Strap part Take hold of the strap part, slide the cable clamp until it stops moving, and then secure it tightly. Note ●● Always disconnect the power supply before connecting or disconnecting cables. Connecting or disconnecting cables while the power is turned on may result in malfunctions. The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always "live" as long as the AC adaptor is connected to an electrical outlet. Note for connecting with an HDMI cable When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to connect the HDMI cable to the connector of the AW‑HN40/AW‑HN38 last. Connecting the HDMI cable to the connector of the AW‑HN40/AW‑HN38 first may result in malfunction. AW‑HN40/AW‑HN38 Monitor HDMI cable 2 1 HDMI-to-DVI converter, etc. Switcher 16