Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 47

Network settings [When using Windows] (continued) 4 Input the network items, and click the [Save] button. ■■Installing the plug-in viewer software To view IP images from the unit on a web browser, the "Network Camera View 4S" plug-in viewer software (ActiveX®) must be installed in your personal computer. ●● When you display the Live screen [Live] on the personal computer for the first time, the installation screen for the plug-in viewer software (ActiveX) appears. Follow the instructions on the screen to perform installation. Notes ●● When a DHCP server is being used, "DNS" of the Easy IP Setup Software can be set to "Auto". ●● After the [Save] button is clicked, it takes about 1 minute for the settings in the unit to be completed. If the AC adaptor or LAN cable is disconnected before the settings are completed, the settings will be canceled. In this case, repeat the steps to establish the settings. ●● When a firewall (including software) has been introduced, enable access to all the UDP ports. ●● When the Easy IP Setup Software is used for the first time, the [Program Compatibility Assistant] screen may appear after quitting the Easy IP Setup Software. Select [This program installed correctly] in the [Program Compatibility Assistant] screen. Notes ●● [Automatic installation of viewer software] is set to [On] at the time of purchase, allowing you to install directly from the unit. If a message appears in the web browser's information bar, see page 135 in the ). ●● If the plug-in viewer software (ActiveX) installation screen continues to appear when switching screens, even after it is installed, restart the personal computer. ●● To uninstall the plug-in viewer software, select [Control Panel] - [Programs] - [Uninstall a program] in Windows, and remove "Network Camera View 4S". ●● If installation of the plug-in viewer software fails, close Internet Explorer with while the above screen is displayed and then click [Next]. Operating Instructions 47