Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 36

Controller supported ●● AW‑RP50: Ver 3.10.00 or later ●● AW-RP120: Ver 2.10.00 or later ●● AK‑HRP200: Ver 4.10-00-0.00 or later ●● If the version older, an upgrade is required. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/ ●● For details on AW‑RP555 and AW‑RP655, refer to page 23 in the . Accessories Check that the following accessories are present and accounted for. ●● After removing the product from its container, dispose of the power cable cap and packing materials in an appropriate manner. ■ Mount bracket for installation surface (Hanging / Desktop 1 (→ page 9, page 15) ■ Main unit mounting screw (with flat washer, spring washer) M3 x 6 mm 1 (→ page 10, page 15) ■ Drop-prevention wire 1 (already attached to the unit) (→ page 9, page 15) ■ Bracket mounting screws (bind-head) M4 x 10 mm....... 4 (→ page 9, page 15) ■ AC adaptor 1 ■ Power cable (1.5 m [4.92 ft]) for AW‑HN40HWPC, AW‑HN40HKPC, AW‑HN38HWPC, AW‑HN38HKPC 1 for AW‑HN40HWE, AW‑HN40HKE, AW‑HN38HWE, AW‑HN38HKE 3 ●● For U.K. and Saudi Arabia ●● For India only ●● For Continental Europe, etc. ●● This product is equipped with 3 types of AC mains cable. Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable. Optional accessories ●● Wireless remote controller AW‑RM50G (Size "AA", "R6" or "LR6" dry battery x 2, obtained separately) ●● Direct ceiling mount bracket WV‑Q105A 36