Panasonic AW-HN40H AW-HN38H Operating Instructions - Page 50

Symptom, Cause and remedial action, Reference, s, opposite direction to

Get Panasonic AW-HN40H PDF manuals and user guides View all Panasonic AW-HN40H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Troubleshooting (continued) Symptom Cause and remedial action Reference pages ●● Is the unit connected to the controller properly?  Refer to the Operating Instructions of the controller. P.19 to 24 Cannot operate using the controller ●● The user authorization must be set to OFF when the AW-RP50, AW-RP120, and AK-HRP200 remote camera controllers are connected in a network. ●● Are all the cameras in the daisy-chain connection turned on? P.88 P.20 ●● It may be necessary to upgrade the version of the controller so that the controller will support the unit. P.36 The unit turns in the opposite direction to the one operated ●● Has the stand-alone (Desktop) installation setting been selected correctly? ●● The reversal setting may have been established at the controller if the unit is connected to the controller.  Refer to the Operating Instructions of the controller. P.46, P.84 --- 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
50
Symptom
Cause and remedial action
Reference
pages
Cannot operate using
the controller
●
Is the unit connected to the controller properly?
Refer to the Operating Instructions of the controller.
P.19 to 24
●
The user authorization must be set to OFF when the AW-RP50,
AW-RP120, and AK-HRP200 remote camera controllers are
connected in a network.
<Operations and
Settings>
P.88
●
Are all the cameras in the daisy-chain connection turned on?
P.20
●
It may be necessary to upgrade the version of the controller so
that the controller will support the unit.
P.36
The unit turns in the
opposite direction to the
one operated
●
Has the stand-alone (Desktop) installation setting been selected
correctly?
<Operations and
Settings>
P.46, P.84
●
The reversal setting may have been established at the controller if
the unit is connected to the controller.
Refer to the Operating Instructions of the controller.
–––
Troubleshooting
(continued)